Timken HM88542/HM88510 Taper 31.75 mm ID Roller Bearing, 73.02 mm OD
- N° de stock RS:
- 134-7484
- Référence fabricant:
- HM88542/HM88510
- Fabricant:
- Timken
Offre groupée disponible
Sous-total (1 unité)*
46,92 €
(TVA exclue)
56,77 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 46,92 € |
| 5 - 9 | 45,06 € |
| 10 - 24 | 44,09 € |
| 25 + | 43,17 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 134-7484
- Référence fabricant:
- HM88542/HM88510
- Fabricant:
- Timken
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Timken | |
| Product Type | Roller Bearing | |
| Inside Diameter | 31.75mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Roller Material | Steel | |
| Outside Diameter | 73.02mm | |
| Standards/Approvals | No | |
| End Type | Sealed | |
| Bearing Dynamic Load Rating | 103kN | |
| Cone Width | 23.02mm | |
| Static Load Rating | 111kN | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque Timken | ||
Product Type Roller Bearing | ||
Inside Diameter 31.75mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Roller Material Steel | ||
Outside Diameter 73.02mm | ||
Standards/Approvals No | ||
End Type Sealed | ||
Bearing Dynamic Load Rating 103kN | ||
Cone Width 23.02mm | ||
Static Load Rating 111kN | ||
Bearing Type Taper | ||
Tapered Roller Bearings - TS (Tapered Single) Imperial/Metric
These bearings are the most basic and most widely used type of tapered roller bearings. They consist of two main separable parts, the cone (inner ring) assembly and the cup (outer ring). They are typically mounted in opposing pairs on a shaft.
Features and Benefits
• Imperial / Metric;• One piece stamped steel cage retains rollers on the cone;• Inner diameter range 7.937 mm to 863.600 mm;• Outer diameter range 31.991 mm to 1060.000 mm;• Single cone and cup
Product Application Information
Typical applications include, vehicle front wheels, differential and pinion configurations, conveyor rolls, machine tool spindles and trailer wheels.
Timken
Liens connexes
- NTN 4T-HM88542/HM88510 Taper Roller 31.75 mm ID Taper Roller Bearing, 73.025 mm OD
- Timken HM88547/HM88510 Taper 33.33 mm ID Roller Bearing, 73.02 mm OD
- Timken 25877/25820 Taper 34.92 mm ID Roller Bearing, 73.02 mm OD
- Timken 33287/33462 Taper 73.02 mm ID Roller Bearing, 117.47 mm OD
- Timken 25877/25821 Taper 34.92 mm ID Roller Bearing, 73.02 mm OD
- Timken 02872/02820 Taper 28.57 mm ID Roller Bearing, 73.02 mm OD
- Timken 18590/18520 Taper 41.27 mm ID Roller Bearing, 73.02 mm OD
- Timken 23690/23620 Taper 34.92 mm ID Roller Bearing, 73.02 mm OD