Timken 25590/25520 Taper 45.61 mm ID Roller Bearing, 82.93 mm OD
- N° de stock RS:
- 134-7465
- Référence fabricant:
- 25590/25520
- Fabricant:
- Timken
Sous-total (1 unité)*
43,54 €
(TVA exclue)
52,68 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 43,54 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 134-7465
- Référence fabricant:
- 25590/25520
- Fabricant:
- Timken
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Timken | |
| Product Type | Roller Bearing | |
| Inside Diameter | 45.61mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Roller Material | Steel | |
| Static Load Rating | 111kN | |
| Cone Width | 19.05mm | |
| End Type | Sealed | |
| Bearing Dynamic Load Rating | 90.5kN | |
| Standards/Approvals | No | |
| Outside Diameter | 82.93mm | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque Timken | ||
Product Type Roller Bearing | ||
Inside Diameter 45.61mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Roller Material Steel | ||
Static Load Rating 111kN | ||
Cone Width 19.05mm | ||
End Type Sealed | ||
Bearing Dynamic Load Rating 90.5kN | ||
Standards/Approvals No | ||
Outside Diameter 82.93mm | ||
Bearing Type Taper | ||
- Pays d'origine :
- US
Tapered Roller Bearings - TS (Tapered Single) Imperial/Metric
These bearings are the most basic and most widely used type of tapered roller bearings. They consist of two main separable parts, the cone (inner ring) assembly and the cup (outer ring). They are typically mounted in opposing pairs on a shaft.
Features and Benefits
• Imperial / Metric;• One piece stamped steel cage retains rollers on the cone;• Inner diameter range 7.937 mm to 863.600 mm;• Outer diameter range 31.991 mm to 1060.000 mm;• Single cone and cup
Product Application Information
Typical applications include, vehicle front wheels, differential and pinion configurations, conveyor rolls, machine tool spindles and trailer wheels.
Timken
Liens connexes
- Timken 25590/25523 Taper 45.62 mm ID Roller Bearing, 82.93 mm OD
- Timken 25584/25520 Taper 44.98 mm ID Roller Bearing, 82.93 mm OD
- Timken 25580/25520 Taper 44.45 mm ID Roller Bearing, 82.93 mm OD
- NTN 4T-25590/25520 Taper Roller 45.618 mm ID Roller Bearing, 82.931 mm OD
- SKF 25590/2/25520/2/Q Taper Roller 45.6 mm ID Tapered Roller Bearing, 82.9 mm OD
- Timken 25577/25523 Taper 42.87 mm ID Roller Bearing, 82.93 mm OD
- NTN 4T-25590/25521 Tapered Roller 45.61 mm ID Tapered Roller Bearing, 83.058 mm OD
- NTN 4T-25581/25520 Tapered Roller 44.45 mm ID Tapered Roller Bearing, 82.93 mm OD