SKF NJ 2305 ECP 25 mm ID Cylindrical Roller Bearing, 62 mm OD
- N° de stock RS:
- 586-919
- Référence fabricant:
- NJ 2305 ECP
- Fabricant:
- SKF
Sous-total (1 paquet de 5 unités)*
287,37 €
(TVA exclue)
347,72 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 18 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Paquet(s) | le paquet | Prix par unité* |
|---|---|---|
| 1 + | 287,37 € | 57,474 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 586-919
- Référence fabricant:
- NJ 2305 ECP
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Cylindrical Roller Bearing | |
| Inside Diameter | 25mm | |
| Race Width | 24mm | |
| Bore Type | Parallel | |
| Cage Material | Non-Metallic | |
| Roller Material | Bearing Steel | |
| Static Load Rating | 36.5kN | |
| Bearing Material | Bearing Steel | |
| Dynamic Load Rating | 46.5kN | |
| Outside Diameter | 62mm | |
| Series | NJ | |
| Number of Rows | 1 | |
| End Type | Open | |
| Standards/Approvals | RoHS Compliance | |
| Limiting Speed | 15000rpm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Cylindrical Roller Bearing | ||
Inside Diameter 25mm | ||
Race Width 24mm | ||
Bore Type Parallel | ||
Cage Material Non-Metallic | ||
Roller Material Bearing Steel | ||
Static Load Rating 36.5kN | ||
Bearing Material Bearing Steel | ||
Dynamic Load Rating 46.5kN | ||
Outside Diameter 62mm | ||
Series NJ | ||
Number of Rows 1 | ||
End Type Open | ||
Standards/Approvals RoHS Compliance | ||
Limiting Speed 15000rpm | ||
- Pays d'origine :
- DE
The SKF Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one on the inner ring, NJ design bearings can accommodate axial displacement in one direction. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
High radial load carrying capacity
Low friction
Long service life
Locate the shaft axially in one direction
Separable design
Liens connexes
- SKF NJ 2305 ECP/C4 25 mm ID Roller Bearing, 62 mm OD
- SKF NJ 2305 ECP/C3 25 mm ID Roller Bearing, 62 mm OD
- SKF NU 2305 ECP 25 mm ID Cylindrical Roller Bearing, 62 mm OD
- SKF NU 2305 ECP/C3 25 mm ID Cylindrical Roller Bearing, 62 mm OD
- SKF NJ 305 ECP 25 mm ID Cylindrical Roller Bearing, 62 mm OD
- SKF NJ 305 ECP/C3 25 mm ID Cylindrical Roller Bearing, 62 mm OD
- SKF NJ 305 ECP/C4 25 mm ID Cylindrical Roller Bearing, 62 mm OD
- SKF NJ 206 ECP/C3 Cylindrical 30 mm ID Cylindrical Roller Bearing, 62 mm OD