SKF NJ 311 ECJ 55 mm ID Cylindrical Roller Bearing, 120 mm OD
- N° de stock RS:
- 586-493
- Référence fabricant:
- NJ 311 ECJ
- Fabricant:
- SKF
Sous-total (1 paquet de 5 unités)*
771,44 €
(TVA exclue)
933,44 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 06 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Paquet(s) | le paquet | Prix par unité* |
|---|---|---|
| 1 + | 771,44 € | 154,288 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 586-493
- Référence fabricant:
- NJ 311 ECJ
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Cylindrical Roller Bearing | |
| Inside Diameter | 55mm | |
| Race Width | 29mm | |
| Bore Type | Parallel | |
| Roller Material | Bearing Steel | |
| Cage Material | Sheet Metal | |
| End Type | Open | |
| Dynamic Load Rating | 156kN | |
| Number of Rows | 1 | |
| Static Load Rating | 143kN | |
| Standards/Approvals | RoHS Compliance | |
| Series | NJ | |
| Limiting Speed | 7000rpm | |
| Outside Diameter | 120mm | |
| Bearing Material | Bearing Steel | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Cylindrical Roller Bearing | ||
Inside Diameter 55mm | ||
Race Width 29mm | ||
Bore Type Parallel | ||
Roller Material Bearing Steel | ||
Cage Material Sheet Metal | ||
End Type Open | ||
Dynamic Load Rating 156kN | ||
Number of Rows 1 | ||
Static Load Rating 143kN | ||
Standards/Approvals RoHS Compliance | ||
Series NJ | ||
Limiting Speed 7000rpm | ||
Outside Diameter 120mm | ||
Bearing Material Bearing Steel | ||
- Pays d'origine :
- DE
The SKF Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one on the inner ring, NJ design bearings can accommodate axial displacement in one direction. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
High radial load carrying capacity
Low friction
Long service life
Locate the shaft axially in one direction
Separable design
Liens connexes
- SKF NJ 311 ECJ/C3 55 mm ID Roller Bearing, 120 mm OD
- SKF NJ 311 ECP 55 mm ID Cylindrical Roller Bearing, 120 mm OD
- SKF NJ 2211 ECJ Cylindrical 55 mm ID Cylindrical Roller Bearing, 100 mm OD
- SKF NJ 211 ECJ Cylindrical 55 mm ID Cylindrical Roller Bearing, 100 mm OD
- SKF NUP 311 ECJ 55 mm ID Roller Bearing, 120 mm OD
- SKF NU 311 ECJ 55 mm ID Roller Bearing, 120 mm OD
- SKF NU 311 ECJ/C3 55 mm ID Roller Bearing, 120 mm OD
- SKF NJ 2213 ECJ 65 mm ID Cylindrical Roller Bearing, 120 mm OD