SKF HK 1010 E 10 mm ID Roller Bearing Needle, 14 mm OD
- N° de stock RS:
- 513-862
- Référence fabricant:
- HK 1010 E
- Fabricant:
- SKF
Offre groupée disponible
Sous-total (1 unité)*
5,31 €
(TVA exclue)
6,43 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
- Plus 106 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 5,31 € |
| 5 - 9 | 5,08 € |
| 10 - 24 | 4,98 € |
| 25 + | 4,88 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 513-862
- Référence fabricant:
- HK 1010 E
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 10mm | |
| Race Width | 10mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Standards/Approvals | No | |
| Maximum Speed - Oil | 24000rpm | |
| Maximum Speed - Grease | 16000rpm | |
| Limiting Speed | 20000rpm | |
| Static Load Rating | 5.3kN | |
| Outside Diameter | 14mm | |
| Dynamic Load Rating | 4.29kN | |
| End Type | Open | |
| Bearing Type | Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 10mm | ||
Race Width 10mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Standards/Approvals No | ||
Maximum Speed - Oil 24000rpm | ||
Maximum Speed - Grease 16000rpm | ||
Limiting Speed 20000rpm | ||
Static Load Rating 5.3kN | ||
Outside Diameter 14mm | ||
Dynamic Load Rating 4.29kN | ||
End Type Open | ||
Bearing Type Needle | ||
Statut RoHS : Exempté
SKF Drawn Cup Needle Roller Bearing, 10mm ID, 14mm OD - HK 1010
Use this compact needle roller bearing from SKF to reduce the friction of radial loads in your machines. It consists of a number of long cylindrical rollers in a metal casing. The non-separable design means this device can accommodate a large number of rollers for excellent load-bearing capacity. This also means it can run at high speed without experiencing wear and tear. This unit has an extremely high reference speed of 18,000r/min (rotations per minute) and a limiting speed of 20,000r/min, so you can rely on it to support high-speed operation without breakdown.
• Sheet steel cage material has high tensile strength for a long service life
• Open end for quick and direct lubrication
• Simple design removes snap rings for straightforward mounting
• 570N fatigue load limit for increased durability against metal corrosion in demanding environments
Applications
• Automotive engineering
• Mining equipment
• Printing presses
• Energy industry
Where can I use this bearing?
This roller bearing is ideal for applications where space is limited. The compact dimensions fit into tight spaces with ease and can bear very high loads. This makes it suitable for high-speed rotating shafts, pivots and levers.
Liens connexes
- SKF HK 1416.2RS 14 mm ID Needle Roller Bearing Needle, 20 mm OD
- INA HK1010-B 10 mm ID Roller Bearing Drawn Cup Needle, 14 mm OD
- SKF HK 1012 10 mm ID Roller Bearing Needle, 14 mm OD
- SKF HK 1014.2RS 10 mm ID Needle Roller Bearing, 14 mm OD
- SKF HK 1412 14 mm ID Roller Bearing Needle, 20 mm OD
- SKF HK 1015 10 mm ID Roller Bearing Needle, 14 mm OD
- RS PRO HK 1010 10 mm ID Metric Roller Bearing Needle, 14 mm OD
- SKF NK 14/20 14 mm ID Needle Roller Bearing Needle Roller, 22 mm OD