SKF LM 29749/711/Q Taper Roller 38.1 mm ID Tapered Roller Bearing, 65.08 mm OD
- N° de stock RS:
- 461-615
- Référence fabricant:
- LM 29749/711/Q
- Fabricant:
- SKF
Sous-total (1 unité)*
64,54 €
(TVA exclue)
78,09 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 06 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 64,54 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 461-615
- Référence fabricant:
- LM 29749/711/Q
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Tapered Roller Bearing | |
| Inside Diameter | 38.1mm | |
| Bore Type | Cylindrical | |
| Cage Material | Sheet Metal | |
| Bearing Dynamic Load Rating | 42.9kN | |
| Cone Width | 18.288mm | |
| Outside Diameter | 65.08mm | |
| Static Load Rating | 57kN | |
| Cup Width | 15.748mm | |
| Number of Rows | 1 | |
| Limiting Speed | 11000rpm | |
| Series | LM | |
| Standards/Approvals | RoHS, eClass, UNSPSC | |
| Race Type | Cylindrical | |
| Bearing Type | Taper Roller | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Tapered Roller Bearing | ||
Inside Diameter 38.1mm | ||
Bore Type Cylindrical | ||
Cage Material Sheet Metal | ||
Bearing Dynamic Load Rating 42.9kN | ||
Cone Width 18.288mm | ||
Outside Diameter 65.08mm | ||
Static Load Rating 57kN | ||
Cup Width 15.748mm | ||
Number of Rows 1 | ||
Limiting Speed 11000rpm | ||
Series LM | ||
Standards/Approvals RoHS, eClass, UNSPSC | ||
Race Type Cylindrical | ||
Bearing Type Taper Roller | ||
- Pays d'origine :
- IN
Akshay
The SKF Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. The inner ring, with rollers and cage, can be mounted separately from the outer ring. These separable and interchangeable components facilitate mounting, dismounting and maintenance. By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.
High radial and axial load carrying capacity
Accommodate axial loads in one direction
Low friction and long service life
Separable and interchangeable components
Liens connexes
- SKF LM 29749/710/Q Taper Roller 38.1 mm ID Tapered Roller Bearing, 65.08 mm OD
- SKF LM 29749/710/VU990 Taper 38.1 mm ID Imperial Roller Bearing, 65.09 mm OD
- Timken LM29749/LM29710 Taper 38.1 mm ID Roller Bearing, 65.08 mm OD
- Timken 13889/13836 Taper 38.1 mm ID Roller Bearing, 65.08 mm OD
- SNR LM29749/710 Roller 38.1 mm ID Bearing, 65.08 mm OD
- SKF LM 11910/Q Single Row Tapered Roller Taper Roller Bearing, 45.237 mm OD
- SKF LM 501310/Q Single Row Tapered Roller Taper Roller Bearing, 73.431 mm OD
- SKF LM 603049/011 Taper Roller 45.9 mm ID Tapered Roller Bearing, 74.9 mm OD