NTN HK5025 50 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 58 mm OD
- N° de stock RS:
- 454-774
- Référence fabricant:
- HK5025
- Fabricant:
- NTN
Sous-total (1 unité)*
14,31 €
(TVA exclue)
17,32 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 14,31 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 454-774
- Référence fabricant:
- HK5025
- Fabricant:
- NTN
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | NTN | |
| Product Type | Needle Roller Thrust Bearing | |
| Inside Diameter | 50mm | |
| Race Width | 25mm | |
| Bore Type | Round | |
| Roller Material | Steel | |
| Cage Material | Steel | |
| Dynamic Load Rating | 38.5kN | |
| Static Load Rating | 82kN | |
| Number of Rows | 1 | |
| Outside Diameter | 58mm | |
| Bearing Material | Steel | |
| End Type | Open | |
| Maximum Speed - Grease | 3200rpm | |
| Maximum Speed - Oil | 4800rpm | |
| Limiting Speed | 3200rpm | |
| Series | HK5025 | |
| Standards/Approvals | RoHS | |
| Internal Clearance | CN | |
| Bearing Type | Drawn Cup Needle Roller | |
| Race Type | Drawn Cup | |
| Sélectionner tout | ||
|---|---|---|
Marque NTN | ||
Product Type Needle Roller Thrust Bearing | ||
Inside Diameter 50mm | ||
Race Width 25mm | ||
Bore Type Round | ||
Roller Material Steel | ||
Cage Material Steel | ||
Dynamic Load Rating 38.5kN | ||
Static Load Rating 82kN | ||
Number of Rows 1 | ||
Outside Diameter 58mm | ||
Bearing Material Steel | ||
End Type Open | ||
Maximum Speed - Grease 3200rpm | ||
Maximum Speed - Oil 4800rpm | ||
Limiting Speed 3200rpm | ||
Series HK5025 | ||
Standards/Approvals RoHS | ||
Internal Clearance CN | ||
Bearing Type Drawn Cup Needle Roller | ||
Race Type Drawn Cup | ||
- Pays d'origine :
- JP
The NTN Needle roller bearing with a drawn cup design offers a compact, lightweight solution for applications with limited space. The open end allows for shaft pass-through and easy lubrication. It provides high load capacity and efficient performance in rotating or oscillating motion.
The minimum operating temperature is -20°C
Rolling element material is Acier 100Cr6
Liens connexes
- NTN HK5020 50 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 58 mm OD
- INA HK5025 50 mm ID Roller Bearing Drawn Cup Needle, 58 mm OD
- NTN HK5024LL/3AS 50 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 58 mm OD
- NTN HK5022L/3AS 50 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 58 mm OD
- NTN HMK4030 40 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 50 mm OD
- NTN HK1212FM 12 mm ID Needle Roller Thrust Bearing Drawn Cup 18 mm OD
- NTN HK1212 12 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 18 mm OD
- NTN HK1210FM 12 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 16 mm OD