NTN 4T-LM67048/LM67010 Taper Roller 31 mm ID Needle Roller Thrust Bearing, 59 mm OD
- N° de stock RS:
- 454-689
- Référence fabricant:
- 4T-LM67048/LM67010
- Fabricant:
- NTN
Sous-total (1 unité)*
16,33 €
(TVA exclue)
19,76 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 11 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 16,33 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 454-689
- Référence fabricant:
- 4T-LM67048/LM67010
- Fabricant:
- NTN
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | NTN | |
| Product Type | Needle Roller Thrust Bearing | |
| Inside Diameter | 31mm | |
| Bore Type | Round | |
| Cage Material | Pressed Steel | |
| Roller Material | Case Hardening Steel | |
| Cup Width | 11.811mm | |
| Maximum Speed - Oil | 8400rpm | |
| Outside Diameter | 59mm | |
| Bearing Dynamic Load Rating | 38.5kN | |
| Standards/Approvals | JIS B 1512, ABMA, RoHS, ISO 355 | |
| Cone Width | 16.764mm | |
| Number of Rows | 1 | |
| Series | 4T-LM67048/LM67010 | |
| Static Load Rating | 41kN | |
| Bearing Material | Case Carburised Steel | |
| Maximum Speed - Grease | 6300rpm | |
| Limiting Speed | 6300, 8400rpm | |
| Bearing Type | Taper Roller | |
| Race Type | Tapered | |
| Sélectionner tout | ||
|---|---|---|
Marque NTN | ||
Product Type Needle Roller Thrust Bearing | ||
Inside Diameter 31mm | ||
Bore Type Round | ||
Cage Material Pressed Steel | ||
Roller Material Case Hardening Steel | ||
Cup Width 11.811mm | ||
Maximum Speed - Oil 8400rpm | ||
Outside Diameter 59mm | ||
Bearing Dynamic Load Rating 38.5kN | ||
Standards/Approvals JIS B 1512, ABMA, RoHS, ISO 355 | ||
Cone Width 16.764mm | ||
Number of Rows 1 | ||
Series 4T-LM67048/LM67010 | ||
Static Load Rating 41kN | ||
Bearing Material Case Carburised Steel | ||
Maximum Speed - Grease 6300rpm | ||
Limiting Speed 6300, 8400rpm | ||
Bearing Type Taper Roller | ||
Race Type Tapered | ||
- Pays d'origine :
- JP
The NTN Single Row Tapered Roller Bearing is available in metric dimensions (ISO 355 and JIS B 1512 standards) and in inches (ABMA standard, including the metric series J). This type of bearing is the most widely used in the tapered roller bearing range and is generally mounted in opposition. It is particularly suitable for applications such as rolling mills, rear axles, wheels of road vehicles and agricultural equipment.
Rolling element material made of case hardening steel
Supports high radial loads
Supports axial loads in one direction
Liens connexes
- Timken LM67048/LM67010 Taper 31.75 mm ID Roller Bearing, 59.13 mm OD
- Timken LM67000LA/LM67048/LM67010 Taper 31.75 mm ID Roller Bearing, 59.13 mm OD
- NTN 4T-32308 Taper Roller Needle Roller Thrust Bearing, 90.000 mm OD
- NTN 4T-LM29749/LM29711 Taper Roller Needle Roller Thrust Bearing, 65.088 mm OD
- NTN 4T-LM29749/LM29710 Taper Roller Needle Roller Thrust Bearing, 65.088 mm OD
- NTN 4T-32006X Taper Roller 30 mm ID Needle Roller Thrust Bearing, 55 mm OD
- NTN 4T-32005X Taper Roller 25 mm ID Needle Roller Thrust Bearing, 47 mm OD
- NTN 4T-32307 Taper Roller 35 mm ID Needle Roller Thrust Bearing, 80 mm OD