NTN 4T-M802048/M802011 Taper Roller 41 mm ID Needle Roller Thrust Bearing, 82 mm OD
- N° de stock RS:
- 453-598
- Référence fabricant:
- 4T-M802048/M802011
- Fabricant:
- NTN
Sous-total (1 unité)*
36,08 €
(TVA exclue)
43,66 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 36,08 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 453-598
- Référence fabricant:
- 4T-M802048/M802011
- Fabricant:
- NTN
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | NTN | |
| Product Type | Needle Roller Thrust Bearing | |
| Inside Diameter | 41mm | |
| Bore Type | Round | |
| Cage Material | Pressed Steel | |
| Roller Material | Case Hardening Steel | |
| Outside Diameter | 82mm | |
| End Type | Open | |
| Bearing Dynamic Load Rating | 89kN | |
| Standards/Approvals | RoHS | |
| Series | Inch | |
| Maximum Speed - Oil | 6100rpm | |
| Maximum Speed - Grease | 4600rpm | |
| Static Load Rating | 104kN | |
| Cup Width | 20.193mm | |
| Number of Rows | 1 | |
| Cone Width | 25.654mm | |
| Limiting Speed | 6100rpm | |
| Bearing Material | Case Carburised Steel | |
| Bearing Type | Taper Roller | |
| Sélectionner tout | ||
|---|---|---|
Marque NTN | ||
Product Type Needle Roller Thrust Bearing | ||
Inside Diameter 41mm | ||
Bore Type Round | ||
Cage Material Pressed Steel | ||
Roller Material Case Hardening Steel | ||
Outside Diameter 82mm | ||
End Type Open | ||
Bearing Dynamic Load Rating 89kN | ||
Standards/Approvals RoHS | ||
Series Inch | ||
Maximum Speed - Oil 6100rpm | ||
Maximum Speed - Grease 4600rpm | ||
Static Load Rating 104kN | ||
Cup Width 20.193mm | ||
Number of Rows 1 | ||
Cone Width 25.654mm | ||
Limiting Speed 6100rpm | ||
Bearing Material Case Carburised Steel | ||
Bearing Type Taper Roller | ||
- Pays d'origine :
- JP
The NTN Single Row Tapered Roller Bearing is available in metric dimensions (ISO 355 and JIS B 1512 standards) and in inches (ABMA standard, including the metric series J). This type of bearing is the most widely used in the tapered roller bearing range and is generally mounted in opposition. It is particularly suitable for applications such as rolling mills, rear axles, wheels of road vehicles and agricultural equipment.
Rolling element material made of case hardening steel
Supports high radial loads
Supports axial loads in one direction
Liens connexes
- NTN 4T-LM104949/LM104911 Taper Roller 50 mm ID Needle Roller Thrust Bearing, 82 mm OD
- Timken M802048/M802011 Taper 41.27 mm ID Roller Bearing, 82.55 mm OD
- NTN 4T-LM501349/LM501310 Taper Roller 41 mm ID Needle Roller Thrust Bearing, 73 mm OD
- NTN 4T-32308 Taper Roller Needle Roller Thrust Bearing, 90.000 mm OD
- NTN 4T-LM29749/LM29711 Taper Roller Needle Roller Thrust Bearing, 65.088 mm OD
- NTN 4T-LM29749/LM29710 Taper Roller Needle Roller Thrust Bearing, 65.088 mm OD
- NTN 4T-M802011 Single Row Tapered Roller Roller Bearing, 82.55 mm OD
- NTN 4T-32006X Taper Roller 30 mm ID Needle Roller Thrust Bearing, 55 mm OD