NTN 4T-30306 Taper Roller 30 mm ID Needle Roller Thrust Bearing, 72 mm OD
- N° de stock RS:
- 453-595
- Référence fabricant:
- 4T-30306
- Fabricant:
- NTN
Sous-total (1 unité)*
24,71 €
(TVA exclue)
29,90 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 2 unité(s) expédiée(s) à partir du 29 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 24,71 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 453-595
- Référence fabricant:
- 4T-30306
- Fabricant:
- NTN
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | NTN | |
| Product Type | Needle Roller Thrust Bearing | |
| Inside Diameter | 30mm | |
| Cage Material | Pressed Steel | |
| Roller Material | Case Hardening Steel | |
| Cup Width | 16mm | |
| Static Load Rating | 61kN | |
| Outside Diameter | 72mm | |
| Bearing Dynamic Load Rating | 66.5kN | |
| Standards/Approvals | ISO 355 | |
| Series | 4T-30306 | |
| Maximum Speed - Oil | 7600rpm | |
| Maximum Speed - Grease | 5700rpm | |
| Bearing Material | Case Carburised Steel | |
| Cone Width | 19mm | |
| Number of Rows | 1 | |
| Bearing Type | Taper Roller | |
| Race Type | Tapered | |
| Sélectionner tout | ||
|---|---|---|
Marque NTN | ||
Product Type Needle Roller Thrust Bearing | ||
Inside Diameter 30mm | ||
Cage Material Pressed Steel | ||
Roller Material Case Hardening Steel | ||
Cup Width 16mm | ||
Static Load Rating 61kN | ||
Outside Diameter 72mm | ||
Bearing Dynamic Load Rating 66.5kN | ||
Standards/Approvals ISO 355 | ||
Series 4T-30306 | ||
Maximum Speed - Oil 7600rpm | ||
Maximum Speed - Grease 5700rpm | ||
Bearing Material Case Carburised Steel | ||
Cone Width 19mm | ||
Number of Rows 1 | ||
Bearing Type Taper Roller | ||
Race Type Tapered | ||
- Pays d'origine :
- JP
The NTN Single Row Tapered Roller Bearing is available in metric dimensions (ISO 355 and JIS B 1512 standards) and in inches (ABMA standard, including the metric series J). This type of bearing is the most widely used in the tapered roller bearing range and is generally mounted in opposition. It is particularly suitable for applications such as rolling mills, rear axles, wheels of road vehicles and agricultural equipment.
Rolling element material made of case hardening steel
Supports high radial loads
Supports axial loads in one direction
Liens connexes
- NTN 4T-32207 Taper Roller 35 mm ID Needle Roller Thrust Bearing, 72 mm OD
- NTN 4T-32306 Taper Roller 30 mm ID Needle Roller Thrust Bearing, 72 mm OD
- NTN 4T-30207 Taper Roller 35 mm ID Needle Roller Thrust Bearing, 72 mm OD
- NTN 4T-HM88649/HM88610 Taper Roller 34 mm ID Needle Roller Thrust Bearing, 72 mm OD
- NTN 4T-32308 Taper Roller Needle Roller Thrust Bearing, 90.000 mm OD
- NTN 4T-LM29749/LM29711 Taper Roller Needle Roller Thrust Bearing, 65.088 mm OD
- NTN 4T-LM29749/LM29710 Taper Roller Needle Roller Thrust Bearing, 65.088 mm OD
- NTN 4T-32006X Taper Roller 30 mm ID Needle Roller Thrust Bearing, 55 mm OD