Igus M6 Female Igumid G Rod End, 6mm Bore Metric
- N° de stock RS:
- 712-4976
- Référence fabricant:
- EBRM-06
- Fabricant:
- Igus
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
8,76 €
(TVA exclue)
10,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 424 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 8,76 € |
| 5 - 9 | 8,40 € |
| 10 + | 8,23 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 712-4976
- Référence fabricant:
- EBRM-06
- Fabricant:
- Igus
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Igus | |
| Product Type | Rod End | |
| Connection Size | M6 Female | |
| Bore Diameter | 6mm | |
| Material | Igumid G | |
| Thread Standard | Metric | |
| Static Load Rating | 750N | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 180°C | |
| Standards/Approvals | No | |
| Overall Width | 40.5mm | |
| Thread Direction | Right Hand | |
| Sélectionner tout | ||
|---|---|---|
Marque Igus | ||
Product Type Rod End | ||
Connection Size M6 Female | ||
Bore Diameter 6mm | ||
Material Igumid G | ||
Thread Standard Metric | ||
Static Load Rating 750N | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 180°C | ||
Standards/Approvals No | ||
Overall Width 40.5mm | ||
Thread Direction Right Hand | ||
- Pays d'origine :
- DE
Igus DryLin W Series Bearing Block, 2100N Static Load Rating, 36mm Carriage Length - WJ200UM-01-16
This bearing block provides guided linear motion for industrial systems, designed for integration into DryLin W assemblies where a compact slider is required. It combines a lightweight carriage with a construction suited to repeated linear travel in automation and mechanical layouts, enabling controlled movement along rails while meeting standard fastener requirements.
Features and Benefits:
• Static load capacity 2100N enhances load-bearing capability
• Die-cast zinc carriage reduces overall mass and increases rigidity
• Slider carriage supports smooth linear guidance and positioning
• Carriage length 36mm permits compact installation in confined spaces
• Carriage width 34.5mm allows stable lateral support during operation
• Die-cast zinc carriage reduces overall mass and increases rigidity
• Slider carriage supports smooth linear guidance and positioning
• Carriage length 36mm permits compact installation in confined spaces
• Carriage width 34.5mm allows stable lateral support during operation
Applications
• Suitable for pick-and-place mechanisms in automation cells
• Ideal for rail-mounted sensor positioning in electronics assembly
• Used for drawer-style actuator stages in electrical enclosures
• Can be used for linear slides in small CNC or dispensing systems
• Ideal for rail-mounted sensor positioning in electronics assembly
• Used for drawer-style actuator stages in electrical enclosures
• Can be used for linear slides in small CNC or dispensing systems
What fastener standard does it accommodate for mounting?
It is compatible with DIN 912 fasteners, allowing straightforward attachment using commonly specified socket-head cap screws.
How does the carriage material influence wear characteristics?
The die-cast zinc construction provides dimensional stability and resists deformation under load, contributing to consistent contact geometry and predictable wear rates in moderate-duty cycles.
Can it be used where space is limited along the rail?
Yes, the short 36mm carriage length combined with a 34.5mm width offers a compact footprint for installations with constrained envelope dimensions.
What operational load should be considered for system design?
Use the 2100N static load figure when determining structural supports and safety margins for stationary or low-speed load scenarios.
Note
IGUBAL bearings are designed to run with clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing.
Liens connexes
- Igus M5 Female Igumid G Rod End, 5 mm Bore Metric
- Igus M8 Female Igumid G Rod End, 8 mm Bore Metric
- Igus M10 Female Igumid G Rod End, 10 mm Bore Metric
- Igus M6 x 1 Male Igumid G Rod End Metric, 6 mm Bore
- Igus M6 x 1 Female Igumid G Rod End, 6 mm Bore Metric
- Igus M10 Male Igumid G Rod End Metric, 10 mm Bore
- Igus M16 Female Igumid G Rod End, 16 mm Bore Metric
- Igus M8 Male Igumid G Rod End Metric, 8 mm Bore