Igus M16 x 2 Male Igumid G Rod End Metric, 16mm Bore
- N° de stock RS:
- 194-5715
- Référence fabricant:
- KALM-S-16-J-EK
- Fabricant:
- Igus
Sous-total (1 unité)*
34,67 €
(TVA exclue)
41,95 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 08 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 34,67 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 194-5715
- Référence fabricant:
- KALM-S-16-J-EK
- Fabricant:
- Igus
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Igus | |
| Product Type | Rod End | |
| Connection Size | M16 x 2 Male | |
| Bore Diameter | 16mm | |
| Material | Igumid G | |
| Dynamic Load Rating | 9600N | |
| Static Load Rating | 19200N | |
| Thread Standard | Metric | |
| Connection Gender | Male | |
| Overall Width | 88mm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Igus | ||
Product Type Rod End | ||
Connection Size M16 x 2 Male | ||
Bore Diameter 16mm | ||
Material Igumid G | ||
Dynamic Load Rating 9600N | ||
Static Load Rating 19200N | ||
Thread Standard Metric | ||
Connection Gender Male | ||
Overall Width 88mm | ||
Standards/Approvals No | ||
igubal® rod ends are corrosion-resistant can be used without problems in harsh environments. In moist or wet environments, they are resistant to weak acids and alkalines. Their resistance to dirt and dust should be noted. Housing made from igumid G, an extremely impact-resistant, long-fibre-reinforced polymer. Suitable for temperatures from -40 °C to +90 °C in long-term use In standard spherical bearings, the spherical ball is made from iglidur® W300 material, which is known for lowest coefficients of friction in dry operation and extremely low tendency to stick-slip. This is especially important for low loads and very slow movements.
Liens connexes
- Igus M16 x 2 Female Igumid G Rod End, 16mm Bore Metric
- Igus M16 Female Igumid G Rod End, 16mm Bore Metric
- Igus M16 Male Igumid G Rod End Metric, 16mm Bore
- Igus M8 x 1.25 Male Igumid G Rod End Metric, 8mm Bore
- Igus M10 x 1.5 Male Igumid G Rod End Metric, 10mm Bore
- Igus M12 x 1.75 Male Igumid G Rod End Metric, 12mm Bore
- Igus M20 x 1.5 Male Igumid G Rod End Metric, 20mm Bore
- Igus M6 x 1 Male Igumid G Rod End Metric, 6mm Bore