Igus M12 x 1.75 Male Stainless Steel Rod End Metric, 12mm Bore
- N° de stock RS:
- 194-5681
- Référence fabricant:
- KARM-S-12-J-EK
- Fabricant:
- Igus
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
19,52 €
(TVA exclue)
23,62 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 19,52 € |
| 5 - 9 | 18,15 € |
| 10 + | 17,81 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 194-5681
- Référence fabricant:
- KARM-S-12-J-EK
- Fabricant:
- Igus
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Igus | |
| Connection Size | M12 x 1.75 Male | |
| Product Type | Rod End | |
| Bore Diameter | 12mm | |
| Material | Stainless Steel | |
| Dynamic Load Rating | 5760N | |
| Static Load Rating | 11520N | |
| Thread Standard | Metric | |
| Overall Width | 72mm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Igus | ||
Connection Size M12 x 1.75 Male | ||
Product Type Rod End | ||
Bore Diameter 12mm | ||
Material Stainless Steel | ||
Dynamic Load Rating 5760N | ||
Static Load Rating 11520N | ||
Thread Standard Metric | ||
Overall Width 72mm | ||
Standards/Approvals No | ||
igubal® rod ends are corrosion-resistant can be used without problems in harsh environments. In moist or wet environments, they are resistant to weak acids and alkalines. Their resistance to dirt and dust should be noted. Housing made from stainless steel, an extremely impact-resistant, long-fibre-reinforced polymer. Suitable for temperatures from -40 °C to +90 °C in long-term use In standard spherical bearings, the spherical ball is made from iglidur® W300 material, which is known for lowest coefficients of friction in dry operation and extremely low tendency to stick-slip. This is especially important for low loads and very slow movements.
Liens connexes
- Igus M12 x 1.75 Female Igumid G Rod End, 12 mm Bore Metric
- Igus M12 x 1.75 Male Igumid G Rod End Metric, 12 mm Bore
- Igus M12 Male Igumid G Rod End Metric, 12 mm Bore
- Igus M20 x 1.5 Male Stainless Steel Rod End Metric, 20 mm Bore
- Igus M16 x 2 Male Stainless Steel Rod End Metric, 16 mm Bore
- Igus M8 x 1.25 Male Stainless Steel Rod End Metric, 8 mm Bore
- Igus M6 x 1 Male Stainless Steel Rod End Metric, 6 mm Bore
- Fluro M12 x 1.75 Male Stainless Steel Rod End Metric, 12 mm Bore