SKF M8 Steel Rod End Metric, 8 mm Bore
- N° de stock RS:
- 588-332
- Référence fabricant:
- SAKAC 8 M
- Fabricant:
- SKF
Sous-total (1 paquet de 10 unités)*
249,66 €
(TVA exclue)
302,09 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 4 unité(s) expédiée(s) à partir du 15 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Paquet(s) | le paquet | Prix par unité* |
|---|---|---|
| 1 + | 249,66 € | 24,966 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 588-332
- Référence fabricant:
- SAKAC 8 M
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Rod End | |
| Connection Size | M8 | |
| Material | Steel | |
| Dynamic Load Rating | 7.2kN | |
| Thread Standard | Metric | |
| Static Load Rating | 8kN | |
| Overall Width | 9.5mm | |
| Standards/Approvals | RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Rod End | ||
Connection Size M8 | ||
Material Steel | ||
Dynamic Load Rating 7.2kN | ||
Thread Standard Metric | ||
Static Load Rating 8kN | ||
Overall Width 9.5mm | ||
Standards/Approvals RoHS | ||
- Pays d'origine :
- DE
SKF Rod End, 8mm Bore Size, M8 Connection Size - SAKAC 8 M
This rod end provides a Compact articulating joint for linkage and pivot applications in industrial systems. It is designed to connect moving parts where angular misalignment occurs and to transfer loads in mechanical assemblies used across automation, electrical and electronic equipment.
Features and Benefits:
• 7.2 kN dynamic load rating increases fatigue life in cyclic use
• 8 kN static load rating supports high static loads securely
• 8mm bore for Compact shaft integration in confined spaces
• M8 metric thread enables direct compatibility with standard fastenings
• 8 kN static load rating supports high static loads securely
• 8mm bore for Compact shaft integration in confined spaces
• M8 metric thread enables direct compatibility with standard fastenings
Applications
• Suitable for motion-control linkages in automation equipment
• Ideal for pivot joints in electrical actuator mechanisms
• Used with Compact mechanical assemblies in electronics enclosures
• Can be used for load-transfer links in test rigs and fixtures
• Ideal for pivot joints in electrical actuator mechanisms
• Used with Compact mechanical assemblies in electronics enclosures
• Can be used for load-transfer links in test rigs and fixtures
What material characteristics affect service wear in bearing contact?
The component is formed from steel, providing a hard, wear-resistant surface that sustains sliding contact under repetitive articulation.
How should one select this item for a load-critical mounting?
Compare the expected Peak static loads to the 8 kN static capacity and ensure dynamic service loads do not exceed 7.2 kN to maintain operational safety margins.
What thread compatibility considerations apply when integrating into assemblies?
The threaded connection follows metric M8 standard dimensions, allowing mating with commonly available metric fasteners and nuts sized for M8 engagement.
Are there any size constraints to consider for tight installations?
The overall width is 9.5mm and the outside diameter measures 25mm, so allow for these envelope dimensions when planning clearances.
Liens connexes
- SKF M5 Steel Rod End Metric, 5 mm Bore
- SKF M6 Steel Rod End Metric, 6 mm Bore
- SKF M8 Male Steel Rod End Metric, 8 mm Bore
- SKF M8 Female Steel Rod End, 8 mm Bore Metric
- SKF M14 Male Steel Rod End Metric, 14 mm Bore
- SKF M12 Male Steel Rod End Metric, 12 mm Bore
- SKF M10 Male Steel Rod End Metric, 10 mm Bore
- SKF M16 Male Steel Rod End Metric, 16 mm Bore