RS PRO Insulated Ring Terminal, M2 Stud Size 26 AWG 22 AWG Wire Size, Yellow

• Tin plating for resistance to corrosion, added strength and excellent conductivity

• Vinyl insulation for electrical insulation and terminal protection

• Colour coded insulation for easy identification of terminal size

• Expanded insulation entry for easy wire insertion

• The stud size to which you will be connecting the ring terminal.

• The inner diameter of the ring terminal

Wire sizes:

Red 0.5-1.5mm²

Blue 1.5-2.5mm²

Yellow 4-6mm²

Firstly, select the correct sized ring terminal. Strip the end of the wire and cut it to the same length as terminal. Insert the wire into the terminal barrel making sure no bare wire is visible. The crimp terminal is then ready to be crimped on to the end of the wire. When crimping a wire terminal, pliers or a ratchet can be used but, for a better quality crimp, it is better to use a ratchet crimping tool. A ratchet crimping tool is preferable as the handles will remain locked until a full crimp cycle is completed which will prevent partial crimps. Insert the barrel of the ring terminal into the appropriate crimping section (indicated by sizes marked on the tool). Squeeze the tool handles together until the ratchet releases. The crimped ring terminal can now be placed over the stud or post and secured in place with a nut or by soldering.

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.