RS PRO, RHB Insulated Ring Terminal, M3.7 Stud Size 22 AWG 16 AWG Wire Size, Red
- N° de stock RS:
- 125-1968
- Numéro d'article Distrelec:
- 304-25-285
- Fabricant:
- RS PRO
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 125-1968
- Numéro d'article Distrelec:
- 304-25-285
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Series | RHB | |
| Product Type | Ring Terminal | |
| Insulation | Insulated | |
| Insulation Material | High Density Polyethylene | |
| Outer Ring Diameter | 5.5mm | |
| Inner Ring Diameter | 3.7mm | |
| Maximum Wire Size AWG | 16AWG | |
| Minimum Wire Size AWG | 22AWG | |
| Overall Length | 25mm | |
| Stud Size | M3.7 | |
| Colour | Red | |
| Contact Material | Copper | |
| Standards/Approvals | ANSI/ESD S20.20:2021 Electrostatic Control Standard, RoHS | |
| Maximum Wire Size mm² | 1.5mm² | |
| Maximum Operating Temperature | 105°C | |
| Minimum Wire Size mm² | 0.5mm² | |
| Minimum Operating Temperature | -10°C | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Series RHB | ||
Product Type Ring Terminal | ||
Insulation Insulated | ||
Insulation Material High Density Polyethylene | ||
Outer Ring Diameter 5.5mm | ||
Inner Ring Diameter 3.7mm | ||
Maximum Wire Size AWG 16AWG | ||
Minimum Wire Size AWG 22AWG | ||
Overall Length 25mm | ||
Stud Size M3.7 | ||
Colour Red | ||
Contact Material Copper | ||
Standards/Approvals ANSI/ESD S20.20:2021 Electrostatic Control Standard, RoHS | ||
Maximum Wire Size mm² 1.5mm² | ||
Maximum Operating Temperature 105°C | ||
Minimum Wire Size mm² 0.5mm² | ||
Minimum Operating Temperature -10°C | ||
- Pays d'origine :
- TW
RS Pro Heat Shrink Ring Terminals
RS Pro range of heat shrink ring terminals made from tin plated copper with a brazed seam. These heat shrink ring connectors have a high density PE (polyethylene) heat shrink sleeve which is colour coded to correspond with the wire size they are used with.