TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M6 Stud Size, 3mm² to 6mm², 12AWG
- N° de stock RS:
- 465-693
- Référence fabricant:
- DR-4-60
- Fabricant:
- TE Connectivity
350 En stock, livraison sous 1 jour(s) (stock Europe)
3900 En stock, livraison sous 3 à 5 jours (stock Europe)
Prix L'unité (en paquet de 50)
0,638 €
(TVA exclue)
0,772 €
(TVA incluse)
Unité | Prix par unité | le paquet* |
---|---|---|
50 - 200 | 0,638 € | 31,90 € |
250 - 1200 | 0,542 € | 27,10 € |
1250 + | 0,478 € | 23,90 € |
*prix conseillé
- N° de stock RS:
- 465-693
- Référence fabricant:
- DR-4-60
- Fabricant:
- TE Connectivity
Documentation technique
Législations et de normes
- Pays d'origine :
- MX
Détails du produit
TE Connectivity DuraSeal Ring Terminals
DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.
Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²
Approvals
UL
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed
Spécifications
Attribut | Valeur |
---|---|
Series | DuraSeal |
Insulation | Insulated |
Insulation Material | Nylon |
Minimum Wire Size mm² | 3mm² |
Maximum Wire Size mm² | 6mm² |
Minimum Wire Size AWG | 12AWG |
Maximum Wire Size AWG | 10AWG |
Stud Size | M6 |
Colour | Yellow |
Contact Plating | Tin |
Contact Material | Copper Alloy |
Overall Length | 41.5mm |