Eaton 2.6 A Resettable Fuse, 6V
- N° de stock RS:
- 225-8286
- Référence fabricant:
- PTSLR18126V260
- Fabricant:
- Eaton
Sous-total (1 bobine de 2000 unités)*
1 227,86 €
(TVA exclue)
1 485,71 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 09 avril 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Bobine(s) | la bobine | Prix par unité* |
|---|---|---|
| 1 + | 1 227,86 € | 0,614 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 225-8286
- Référence fabricant:
- PTSLR18126V260
- Fabricant:
- Eaton
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Eaton | |
| Product Type | Resettable Fuse | |
| Trip Current | 6A | |
| Voltage | 6V | |
| Current Rating | 50A | |
| Time to Trip | 2s | |
| Hold Current | 2.6A | |
| Length | 4.5mm | |
| Height | 400μm | |
| Width | 3.2mm | |
| Minimum Resistance | 3mΩ | |
| Minimum Operating Temperature | -40°C | |
| Maximum Resistance | 0.02Ω | |
| Maximum Operating Temperature | 85°C | |
| Power Dissipation | 1W | |
| Standards/Approvals | cURus, RoHS, UL | |
| Package Type | Reel | |
| Series | Bussmann | |
| Sélectionner tout | ||
|---|---|---|
Marque Eaton | ||
Product Type Resettable Fuse | ||
Trip Current 6A | ||
Voltage 6V | ||
Current Rating 50A | ||
Time to Trip 2s | ||
Hold Current 2.6A | ||
Length 4.5mm | ||
Height 400μm | ||
Width 3.2mm | ||
Minimum Resistance 3mΩ | ||
Minimum Operating Temperature -40°C | ||
Maximum Resistance 0.02Ω | ||
Maximum Operating Temperature 85°C | ||
Power Dissipation 1W | ||
Standards/Approvals cURus, RoHS, UL | ||
Package Type Reel | ||
Series Bussmann | ||
- Pays d'origine :
- CN
Eaton Resettable Fuse, 50A Current Rating, 6V Voltage - PTSLR18126V260
This resettable fuse is a polymer-based protective device designed to limit excessive current in low-voltage systems. It operates as an automatic overcurrent protector, reverting to normal conductivity after fault removal and cooling. The component is supplied on a reel for convenient assembly into surface-mount production lines and is intended for use where repeated trip/reset cycles and Compact integration are required.
Features and Benefits:
• 50A rating allows handling of high transient currents • 2.6A hold current prevents nuisance trips during normal loads • 6A trip current initiates protection within 2s for prompt response • 0.02Ω maximum resistance minimises voltage drop under load • 1W power dissipation controls thermal stress during fault conditions • -40°C to 85°C operating range supports extreme environment use
Applications
• Suitable for automotive accessory power circuits requiring resettable protection • Ideal for industrial control modules with recurring inrush currents • Used with battery management and charging systems to prevent overloads • Can be used for consumer electronics where Compact resettable protection is needed
What mounting method is intended for assembly lines?
It is provided in a reel package for automated placement of surface-mount components.
How does the device behave during a sustained overcurrent?
When current exceeds the trip threshold it increases resistance, reducing current flow until the fault clears and temperature falls.
What approvals permit use in regulated installations?
It carries cURus, UL and RoHS approvals allowing conformity with common safety and material directives.
How thin is the component for tight-profile designs?
The component has a 0.4mm height suitable for low-profile board layouts.
What are the electrical extremes of resistance one can expect?
Minimum measured resistance is around 3mΩ while maximum is specified as 0.02Ω.
Note
Eaton formerly known as Bussmann