OPB350W250Z Optek, Screw Mount Reflective Optical Sensor, Phototransistor Output
- N° de stock RS:
- 170-0783
- Référence fabricant:
- OPB350W250Z
- Fabricant:
- Optek
Offre groupée disponible
Sous-total (1 sachet de 25 unités)*
199,30 €
(TVA exclue)
241,15 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 75 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 75 unité(s) expédiée(s) à partir du 04 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Le Sachet* |
|---|---|---|
| 25 - 100 | 7,972 € | 199,30 € |
| 125 - 225 | 7,764 € | 194,10 € |
| 250 + | 7,574 € | 189,35 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 170-0783
- Référence fabricant:
- OPB350W250Z
- Fabricant:
- Optek
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Optek | |
| Peak Sensor Distance | 6.35mm | |
| Output Device | Phototransistor | |
| Number of Channels | 1 | |
| Number of Pins | 4 | |
| Mounting Type | Screw Mount | |
| Dimensions | 29.59 x 7.62 x 13.34mm | |
| Height | 13.34mm | |
| Length | 29.59mm | |
| Maximum Operating Temperature | +85°C | |
| Minimum Operating Temperature | -40°C | |
| Width | 7.62mm | |
| Operating Temperature Range | -40 → +85°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Optek | ||
Peak Sensor Distance 6.35mm | ||
Output Device Phototransistor | ||
Number of Channels 1 | ||
Number of Pins 4 | ||
Mounting Type Screw Mount | ||
Dimensions 29.59 x 7.62 x 13.34mm | ||
Height 13.34mm | ||
Length 29.59mm | ||
Maximum Operating Temperature +85°C | ||
Minimum Operating Temperature -40°C | ||
Width 7.62mm | ||
Operating Temperature Range -40 → +85°C | ||
- Pays d'origine :
- MX
Tube Liquid Sensor
The OPB350 series liquid sensor is designed to work with 3.2mm (1/8 inch) and 6.3mm (1/4 inch) outside diameter clear tubes. Used in conjunction with suitably designed output reference circuitry, output states such as "fluid present", "no fluid present" and "no tube present" can be recognised. Clear liquid present causes the phototransistor to sink the maximum current, while dark liquid present causes it to sink the minimum current. As bubbles pass through the tube, the signal will vary between the liquid present and no liquid states. If no liquid is present, the phototransistor sinks only a small amount of current. If no tube is present, the phototransistor sinks a larger current than in the no liquid state.
Opaque plastic housing enhances ambient light rejection
Lead length 610mm, 26 AWG wire
Applications: non-contact sensing of oils and other petroleum products, coloured fluids, toner fluids and water
Lead length 610mm, 26 AWG wire
Applications: non-contact sensing of oils and other petroleum products, coloured fluids, toner fluids and water
Liens connexes
- OPB350W250Z Optek Phototransistor Output
- OPB705 Optek Phototransistor Output
- OPB732 Optek Phototransistor Output
- OPB702 Optek Phototransistor Output
- OPB720A-06Z Optek Open Collector Output
- OPB720B-06Z Optek Open Collector Output
- OPB720B-30VZ Optek Open Collector Output
- OPB365T55 Optek Phototransistor Output
