Cynergy3 SPST PCB Reed Switch 1 A 230 V ac/dc
- N° de stock RS:
- 229-3658
- Numéro d'article Distrelec:
- 303-99-300
- Référence fabricant:
- SRA200G/20-30
- Fabricant:
- Cynergy3
Sous-total (1 unité)*
4,22 €
(TVA exclue)
5,11 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 173 unité(s) prête(s) à être expédiée(s)
- Plus 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 3 250 unité(s) expédiée(s) à partir du 24 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 4,22 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 229-3658
- Numéro d'article Distrelec:
- 303-99-300
- Référence fabricant:
- SRA200G/20-30
- Fabricant:
- Cynergy3
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Cynergy3 | |
| Product Type | Reed Switch | |
| Contact Configuration | SPST | |
| Maximum Switching Current | 1A | |
| Maximum Switching Power | 12W | |
| Maximum Switching Voltage | 230V ac/dc | |
| Contact Resistance | 100mΩ | |
| Contact Material | Rhodium | |
| Maximum Release Time | 0.1ms | |
| Operating Time Including Bounce | 2.5ms | |
| Terminal Type | Wire | |
| AT Value Range | 20 → 50 AT | |
| Mount Type | PCB | |
| Minimum Operating Temperature | -40°C | |
| Width | 0.1in | |
| Maximum Operating Temperature | 150°C | |
| Length | 55mm | |
| Series | MRA | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Cynergy3 | ||
Product Type Reed Switch | ||
Contact Configuration SPST | ||
Maximum Switching Current 1A | ||
Maximum Switching Power 12W | ||
Maximum Switching Voltage 230V ac/dc | ||
Contact Resistance 100mΩ | ||
Contact Material Rhodium | ||
Maximum Release Time 0.1ms | ||
Operating Time Including Bounce 2.5ms | ||
Terminal Type Wire | ||
AT Value Range 20 → 50 AT | ||
Mount Type PCB | ||
Minimum Operating Temperature -40°C | ||
Width 0.1in | ||
Maximum Operating Temperature 150°C | ||
Length 55mm | ||
Series MRA | ||
Standards/Approvals No | ||
- Pays d'origine :
- CN
Sensata Cynergy3 Reed Switch, SPNO, 55mm - SRA Series - SRA200G/20-30
Use this Sensata Cynergy3 reed switch with location sensors, proximity switches and level switches at low to medium voltages. Its compact design makes it ideal for applications where there isn't a lot of space available. The pin contacts on either end of the unit are a standard shape and size. This makes for quick and easy installation directly onto your printed circuit board (PCB). Once fitted, the pins create an airtight seal that stops dust from getting in and wearing the connection down. This contributes to the switch's reliable performance and long service life.
Features & Benefits
• Rhodium contact material reduces wear, corrosion and heat damage for improved durability
• SPNO (single pole, normally open) configuration allows the relay to complete the circuit and directly activate the reed switch
• Fast 2.5ms operating time (including bounce) and a 0.5ms release time for high efficiency
Can I clean this reed relay?
As Sensata Cynergy3 reed relays don't come hermetically sealed as standard, it's not advisable to clean them with water-based solutions. If you need to clean your PCB after the relay has been soldered on, use an IPA (isopropyl alcohol) solution.
Liens connexes
- Cynergy3 SPST PCB Reed Switch 300 mA 300 V
- Cynergy3 SPST PCB Reed Switch 500 mA 150 V ac/dc
- Cynergy3 SPST PCB Reed Switch 10 mA 30 V ac/dc
- Cynergy3 SPST PCB Reed Switch 100 mA 24 V ac/dc
- Cynergy3 SPST PCB Reed Switch 1.3 A 250 V ac/dc
- Cynergy3 SPCO PCB Reed Switch 250 mA 175 V ac/dc
- Cynergy3 SPST Reed Switch 5 A 250 V ac/dc
- Cynergy3 PCB Reed Relay SPST, 150 Ω
