Références fabricant

RS PRO PCB Reed Relay, 5V dc Coil, SPDT, 175V dc Max, 250mA Max, 200 Ω

N° de stock RS:: 291-9704
Fabricant:: RS PRO

RS PRO PCB Reed Relay, 5V dc Coil, SPDT, 175V dc Max, 250mA Max, 200 Ω

Sous-total (1 unité)*

14,36 €

(TVA exclue)

17,38 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

Plus 38 unité(s) expédiée(s) à partir du 19 octobre 2026
Plus 228 unité(s) expédiée(s) à partir du 19 octobre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	14,36 €

*Prix donné à titre indicatif

N° de stock RS:: 291-9704
Fabricant:: RS PRO

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	RS PRO
	Product Type	Reed Relay
	Contact Configuration	SPDT
	Mount Type	PCB
	Switching Current	250mA
	Coil Power	125mW
	Coil Resistance	200Ω
	Terminal Type	Through Hole
	Operating Time	0.7ms
	Switching Power	15W
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	70°C
	Standards/Approvals	No
	Length	19.3mm
	Series	RS PRO
	Height	5.1mm
	Isolation Coil To Contact	1.5kV dc
	Contact Resistance	250mΩ
	Latching	No

	Sélectionner tout
	Marque RS PRO
	Product Type Reed Relay
	Contact Configuration SPDT
	Mount Type PCB
	Switching Current 250mA
	Coil Power 125mW
	Coil Resistance 200Ω
	Terminal Type Through Hole
	Operating Time 0.7ms
	Switching Power 15W
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 70°C
	Standards/Approvals No
	Length 19.3mm
	Series RS PRO
	Height 5.1mm
	Isolation Coil To Contact 1.5kV dc
	Contact Resistance 250mΩ
	Latching No

Pays d'origine :: DE

RS PRO SPDT Reed Relay, 0.25 A, 5 V DC

If you're looking for a compact, speedy relay to use in an electrical circuit, consider this RS PRO single-pole, normally open (SPNO) reed relay. The neat and low profile design features a mineral-filled casing, and the device has copper alloy pins for strength coupled with high conductivity. It has a maximum switching current of 0.25 A AC/DC and a coil voltage of 5 V DC.

You can use this relay on printed circuit boards thanks to its DIP (dual in-line package) housing and the casing is fully sealed. It features a normally open (NO) pole and a coil suppression diode across pins two and six.

Needing little power to actuate, you'll often find these types of relays used in electronic circuits. This product is UL (Underwriters Laboratories) approved and meets the organisation's international safety standards.

Features and Benefits

• Reed relay with SPNO contact configuration

• Maximum switching power of 3 W (DC)

• Maximum switching current rating of 0.25 A (AC/DC)

• Isolation coil to contact of 1.5 kV DC

• Maximum switching voltage of 175 V DC

• Life of 1000000000 electric cycles

• Operating time of 0.5 ms

• PCB mounting type

• Contact resistance of 150 (Static) mΩ and 200 (Dynamic) mΩ

• Operating temperature range of -20°C to +70°C

• Coil power of 50 mW

• Dimensions of 19.3 mm x 6.4 mm x 5.1 mm

• Coil voltage of 5 V DC

• Through-hole terminal

• Coil resistance of 200 Ω

• RoHS (Restriction of Hazardous Substances) compliant

RS PRO

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Approvals

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.