RS Better World

Siemens Residual Current Circuit Breaker with Overload Protection, 13A Current Rating, 2-Pole, 30 mA Trip Sensitivity,

N° de stock RS:: 187-3288
Numéro d'article Distrelec:: 301-49-285
Référence fabricant:: 5SV1316-7KK13
Fabricant:: Siemens

Siemens Residual Current Circuit Breaker with Overload Protection, 13A Current Rating, 2-Pole, 30 mA Trip Sensitivity,

Sous-total (1 unité)*

178,77 €

(TVA exclue)

216,31 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

Plus 57 unité(s) expédiée(s) à partir du 04 juin 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	178,77 €

*Prix donné à titre indicatif

Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables.

Cliquez ici pour en savoir plus.

N° de stock RS:: 187-3288
Numéro d'article Distrelec:: 301-49-285
Référence fabricant:: 5SV1316-7KK13
Fabricant:: Siemens

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Siemens
	Product Type	Residual Current Circuit Breaker with Overload Protection
	Current Rating	13A
	Number of Poles	2
	Range	SENTRON
	Series	5SV1316
	Trip Sensitivity	30mA
	Tripping Characteristics	Type C
	Mount Type	DIN Rail
	Rated AC Voltage	230V
	Terminal Type	Screw
	Earth Leakage Protection Type	Type A
	Height	90mm
	Depth	77mm
	Width	18mm
	Better World Product	Yes
	Better World Claim	Concentrated or Compact Solution, Extended Product Life, Low Carbon Manufacture
	Breaking Capacity	6kA
	Standards/Approvals	No

	Sélectionner tout
	Marque Siemens
	Product Type Residual Current Circuit Breaker with Overload Protection
	Current Rating 13A
	Number of Poles 2
	Range SENTRON
	Series 5SV1316
	Trip Sensitivity 30mA
	Tripping Characteristics Type C
	Mount Type DIN Rail
	Rated AC Voltage 230V
	Terminal Type Screw
	Earth Leakage Protection Type Type A
	Height 90mm
	Depth 77mm
	Width 18mm
	Better World Product Yes
	Better World Claim Concentrated or Compact Solution, Extended Product Life, Low Carbon Manufacture
	Breaking Capacity 6kA
	Standards/Approvals No

Pays d'origine :: RO

Siemens 5SV1316 Series Residual Current Circuit Breaker with Overload Protection, 13A Current, 30mA Trip Sensitivity - 5SV1316-7KK13

This residual current circuit-breaker with overload protection provides combined earth-fault detection and overcurrent interruption for single-phase installations. Designed for DIN-rail fitting in distribution boards, it protects circuits by disconnecting on residual currents and instantaneous overloads while supporting AC supply systems at 230V and 50 Hz.

Features & Benefits

• Type A detection with 30 mA sensitivity for AC and pulsating faults
• 6 kA breaking capacity to limit fault energy and damage
• Type C instantaneous tripping for moderate inrush current tolerance
• Two-pole design enabling simultaneous live and NEUTRAL switching
• Screw terminals accepting up to 16mm² for robust conductor connections
• Compact width of 18mm conserving panel space

Applications

• Suitable for residential distribution boards requiring earth-leakage protection
• Ideal for small commercial installations with single-phase circuits
• Used for protecting lighting and socket circuits with moderate inrush currents
• Can be used for retrofit projects where DIN-rail mounting is required

What is the expected mechanical service life under normal switching?

The device is rated for approximately 10,000 switching cycles in typical mechanical operation.

How does ambient temperature affect rated current-carrying capability?

The rated 13A current is derated progressively with temperature, for example to about 12.35A at 40 °C and to about 10.01A at 70 °C.

What installation orientations and clearances are supported?

It may be mounted in any position on a standard DIN rail and offers IP20 protection when installed with conductors connected inside a distribution enclosure.

Which surge and switching performance figures are relevant for coordination?

Surge resistance is about 1 kA for an 8/20 μs waveform and switching capacities include 6 kA per EN 60898 and 15 kA per IEC 60947-2.

What conductor preparations and tightening parameters are required?

Stranded conductors up to 16mm² and finely stranded with ferrules up to 10mm² are acceptable and Terminal screws should be tightened to between 1.2 and 2 N·m.