ABB Residual Current Circuit Breaker with Overload Protection, 16A Current Rating, 1-Pole, 30 mA Trip Sensitivity, Type
- N° de stock RS:
- 183-3708
- Référence fabricant:
- 2CSR245441R1164/471033
- Fabricant:
- ABB
Sous-total (1 unité)*
133,60 €
(TVA exclue)
161,66 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 8 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 133,60 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 183-3708
- Référence fabricant:
- 2CSR245441R1164/471033
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Current Rating | 16A | |
| Product Type | Residual Current Circuit Breaker with Overload Protection | |
| Range | DS201 | |
| Series | DS201 | |
| Number of Poles | 1 | |
| Trip Sensitivity | 30mA | |
| Tripping Characteristics | Type C | |
| Rated AC Voltage | 240V ac | |
| Earth Leakage Protection Type | Type A | |
| Width | 69mm | |
| Depth | 85mm | |
| Height | 85mm | |
| Standards/Approvals | EN 61009-1, IEC 61009-1, IEC 61009-2-1, EN 61009-2-1 | |
| Breaking Capacity | 4.5kA | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Current Rating 16A | ||
Product Type Residual Current Circuit Breaker with Overload Protection | ||
Range DS201 | ||
Series DS201 | ||
Number of Poles 1 | ||
Trip Sensitivity 30mA | ||
Tripping Characteristics Type C | ||
Rated AC Voltage 240V ac | ||
Earth Leakage Protection Type Type A | ||
Width 69mm | ||
Depth 85mm | ||
Height 85mm | ||
Standards/Approvals EN 61009-1, IEC 61009-1, IEC 61009-2-1, EN 61009-2-1 | ||
Breaking Capacity 4.5kA | ||
- Pays d'origine :
- IT
The DS201 series RCBO is a 1P+N in two-modules device for the protection of end user single-phase circuits against overload and short-circuit currents, provides an optimal trade-off between safety and continuity of service, thanks to the resistance to unwanted trippings, protection against indirect contacts and additional protection against direct contacts (with sensitivity = 30 mA), protection and isolation of resistive and inductive loads. This product is suitable for installations where neutral on the left is needed.
Liens connexes
- Siemens Residual Current Circuit Breaker with Overload Protection 4-Pole
- Hager Residual Current Circuit Breaker with Overload Protection 1-Pole
- Hager Residual Current Circuit Breaker with Overload Protection 2-Pole
- Lovato Residual Current Circuit Breaker with Overload Protection 1-Pole
- Lovato Residual Current Circuit Breaker with Overload Protection 1-Pole
- Lovato Residual Current Circuit Breaker with Overload Protection 1-Pole
- Europa Residual Current Circuit Breaker with Overload Protection 2-Pole
- ABB Residual Current Circuit Breaker with Overload Protection 2-Pole