onsemi 1 PWM Controller, 65 kHz 35V 7-Pin, SOIC
- N° de stock RS:
- 178-4344
- Référence fabricant:
- NCP1239JD65R2G
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 178-4344
- Référence fabricant:
- NCP1239JD65R2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Maximum Switching Frequency | 65kHz | |
| Product Type | PWM Controller | |
| Start-up Supply Current | 0.5mA | |
| Supply Current | 1.4mA | |
| Zero Power Detection | No | |
| Output Current | 500mA | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 8V | |
| Package Type | SOIC | |
| Topology | Flyback | |
| Maximum Supply Voltage | 35V | |
| Pin Count | 7 | |
| Maximum Duty Cycle | 84% | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| PWM Controller Type | Current Mode | |
| Standards/Approvals | RoHS, Pb-Free | |
| Series | NCP1239 | |
| Height | 1.5mm | |
| Length | 5mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Maximum Switching Frequency 65kHz | ||
Product Type PWM Controller | ||
Start-up Supply Current 0.5mA | ||
Supply Current 1.4mA | ||
Zero Power Detection No | ||
Output Current 500mA | ||
Mount Type Surface | ||
Minimum Supply Voltage 8V | ||
Package Type SOIC | ||
Topology Flyback | ||
Maximum Supply Voltage 35V | ||
Pin Count 7 | ||
Maximum Duty Cycle 84% | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
PWM Controller Type Current Mode | ||
Standards/Approvals RoHS, Pb-Free | ||
Series NCP1239 | ||
Height 1.5mm | ||
Length 5mm | ||
Automotive Standard No | ||
- Pays d'origine :
- PH
The NCP1239 is a fixed-frequency current-mode controller featuring a high-voltage start-up current source to provide a quick and lossless power-on sequence. This function greatly simplifies the design of the auxiliary supply and the VCC capacitor by activating the internal start-up current source to supply the controller during start-up, transients, latch, stand-by etc. With a supply range up to 35 V, the controller hosts a jittered 65 or 100-kHz switching circuitry operated in peak current mode control.
Fixed-Frequency 65-kHz or 100-kHz Current-Mode Control Operation
Frequency Foldback Down to 26 kHz and Skip Mode to Maximize Performance in Light Load Conditions
Adjustable Over Power Protection (OPP) Circuit
High-Voltage Current Source with Brown-Out (BO) Detection
Internal Slope Compensation
Internal Fixed Soft-Start
Frequency Jittering in Normal and Frequency Foldback Modes
64-ms Timer-Based Short-Circuit Protection with Auto-Recovery or Latched Operation