ROHM BM2P241W-Z PWM Controller 650V 7-Pin, DIP-7K
- N° de stock RS:
- 264-705
- Référence fabricant:
- BM2P241W-Z
- Fabricant:
- ROHM
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 paquet de 5 unités)*
8,85 €
(TVA exclue)
10,70 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 100 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 - 45 | 1,77 € | 8,85 € |
| 50 - 95 | 1,68 € | 8,40 € |
| 100 - 495 | 1,558 € | 7,79 € |
| 500 - 995 | 1,432 € | 7,16 € |
| 1000 + | 1,38 € | 6,90 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 264-705
- Référence fabricant:
- BM2P241W-Z
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Product Type | PWM Controller | |
| Start-up Supply Current | 850μA | |
| Supply Current | 850μA | |
| Output Current | 1.61A | |
| Package Type | DIP-7K | |
| Minimum Supply Voltage | 9.5V | |
| Pin Count | 7 | |
| Topology | Back Converter | |
| Maximum Supply Voltage | 650V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Duty Cycle | 45% | |
| Maximum Operating Temperature | 105°C | |
| PWM Controller Type | Current Mode | |
| Height | 8.63mm | |
| Standards/Approvals | No | |
| Series | BM2Pxx1W-Z | |
| Length | 9.27mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Product Type PWM Controller | ||
Start-up Supply Current 850μA | ||
Supply Current 850μA | ||
Output Current 1.61A | ||
Package Type DIP-7K | ||
Minimum Supply Voltage 9.5V | ||
Pin Count 7 | ||
Topology Back Converter | ||
Maximum Supply Voltage 650V | ||
Minimum Operating Temperature -40°C | ||
Maximum Duty Cycle 45% | ||
Maximum Operating Temperature 105°C | ||
PWM Controller Type Current Mode | ||
Height 8.63mm | ||
Standards/Approvals No | ||
Series BM2Pxx1W-Z | ||
Length 9.27mm | ||
Automotive Standard No | ||
The ROHM PWM type DC or DC converter for AC or DC provides an optimum system for all products that include an electrical outlet. It enables simpler design of a high effective converter specializing in non-isolation. By a built-in startup circuit that tolerates 650 V, this IC contributes to low power consumption. A current detection resistor as internal device realizes the small power supply designs. Since a current mode control is utilized, the current can be restricted in each cycle and an excellent performance is demonstrated in the bandwidth and transient response. The switching frequency is fixed to 65 kHz. A frequency hopping function is also on chip, and it contributes to low EMI. In addition, a built-in Super Junction MOSFET which tolerates 650 V makes the design easy.
PWM Current Mode Method
Frequency Hopping Function
Burst Operation at Light Load
Built-in 650 V Startup Circuit
Built-in 650 V Super Junction MOSFET
VCC UVLO (Under Voltage Lockout)
VCC OVP (Over Voltage Protection)
Over Current Detection Function per Cycle
Soft Start Function