EAO Protective Shroud, For Use With Use only for Part No. 704.064.2 and 704.066.2
- N° de stock RS:
- 200-4122
- Numéro d'article Distrelec:
- 301-86-534
- Référence fabricant:
- 704.927.9
- Fabricant:
- EAO
Bénéficiez d'une remise sur les achats en gros
Ajoutez 15 de plus pour économiser 20,25 €
Consulter les options de prix de grosSous-total (1 unité)*
33,90 €
(TVA exclue)
41,02 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 13 unité(s) expédiée(s) à partir du 21 novembre 2026
- Plus 64 unité(s) expédiée(s) à partir du 24 décembre 2026
- Plus 32 unité(s) expédiée(s) à partir du 14 janvier 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Économie |
|---|---|---|
| 1 - 14 | 33,90 € | - |
| 15 - 49 | 32,55 € | 20,25 € |
| 50 - 99 | 31,18 € | 136,00 € |
| 100 + | 27,12 € | 678,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 200-4122
- Numéro d'article Distrelec:
- 301-86-534
- Référence fabricant:
- 704.927.9
- Fabricant:
- EAO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | EAO | |
| Product Type | Shroud | |
| Sub Type | Protective Shroud | |
| For Use With | Use only for Part No. 704.064.2 and 704.066.2 | |
| Standards/Approvals | RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque EAO | ||
Product Type Shroud | ||
Sub Type Protective Shroud | ||
For Use With Use only for Part No. 704.064.2 and 704.066.2 | ||
Standards/Approvals RoHS | ||
- Pays d'origine :
- CH
EAO Shroud, Plastic Material, 83mm Diameter - 04 Series - 704.927.9
Keep your push buttons safe and sound with this shroud from EAO. It's constructed specifically for use with emergency stop switches (787-4710 and 903-9486) and prevents them from being pushed, putting paid to panic caused by accidental activation. The shroud is made of durable plastic for resistance to impact and corrosion. It also has holes on its sides that can accommodate an anti-rotational pin to prevent a reset after you've actuated the button, which comes in handy during equipment maintenance and repair.
• IP65 rating means it's dustproof and protected against low-pressure water jets
• Diameter of 83mm for all-round protection of the push button
• Light weight of 67g to place minimal strain on your equipment
• Bright yellow colour makes it stand out on a busy panel
Applications
• HMIs
• Measurement and instrumentation devices
• Pharmaceutical production
The EAO emergency stop protective shroud has a raised design constructed totally in plastic and is yellow in colour. It has dimension of Ø 83 mm and SEMI S2-93/12.4.c standard. To be use only for Part No. 704.064.2 und 704.066.2. The protection shroud is not suitable for a proper use of emergency-stop. It can obstruct a spontaneous operation of the emergency-stop.
What conditions should I take note of when installing this shroud?
IP65 front protection
Light-weight 0.067 kg
When installing this shroud on a push button, the button must not be set back more than 3mm from the front of the guard. This helps to ensure that you can still actuate the switch with your palm.
Liens connexes
- EAO 704.066.2 Push Buttons
- EAO Cover, For Use With Protective Shroud
- EAO Protective Shroud, For Use With Emergency Stop Switch
- EAO Protective Shroud, For Use With Push Button
- EAO Protective Shroud Actuators
- EAO Protective Shroud
- 3M Protective Shroud for use with Welding Helmet G5-01
- Kern 572-A02S05 Protective Cover, For Use With: Spare Parts
