Verder Pump
- N° de stock RS:
- 764-231
- Référence fabricant:
- 155.9.0022
- Fabricant:
- Verder
Visuel non contractuel
Sous-total (1 unité)*
108,55 €
(TVA exclue)
131,35 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- 3 unité(s) expédiée(s) à partir du 28 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 108,55 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 764-231
- Référence fabricant:
- 155.9.0022
- Fabricant:
- Verder
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Verder | |
| Product Type | Pump | |
| Sélectionner tout | ||
|---|---|---|
Marque Verder | ||
Product Type Pump | ||
- Pays d'origine :
- GB
Verderprene FDA 4.8ID x 2.4WT Tube Element
• Excellent mechanical strength
• Temp. range: +10°C to + 85°C
• Wide chemical resistance
• Excellent strength against
oxidising agents
• Can be autoclaved
• Compatible with most CIP and SIP solutions
• Temp. range: +10°C to + 85°C
• Wide chemical resistance
• Excellent strength against
oxidising agents
• Can be autoclaved
• Compatible with most CIP and SIP solutions
Compliance: ROHS
FDA 21 CFR 177.1210
FDA 21 CFR 177.2600
Finished articles may contact only food types I, II, IV-B, VI (up to 15% ethanol), V11B, and VIII as described in Rable 1 of 21 CFR 176.170(c)
Ingredients are produced under conditions of good manufacturing practice.
The manufacturer of any food, direct or indirect food additive, or food contact substance or article containing this product has the responsibility to ensure complaince with applicable FDA regulations and to ensure that any food contact article is technically suitable for the intended use.
Flow rate: 5-1100ml/min
Element connector / gasket material: PP/EPDM
To be used with 155.5.1001 only.
FDA 21 CFR 177.1210
FDA 21 CFR 177.2600
Finished articles may contact only food types I, II, IV-B, VI (up to 15% ethanol), V11B, and VIII as described in Rable 1 of 21 CFR 176.170(c)
Ingredients are produced under conditions of good manufacturing practice.
The manufacturer of any food, direct or indirect food additive, or food contact substance or article containing this product has the responsibility to ensure complaince with applicable FDA regulations and to ensure that any food contact article is technically suitable for the intended use.
Flow rate: 5-1100ml/min
Element connector / gasket material: PP/EPDM
To be used with 155.5.1001 only.