RS PRO Capacitive Block Proximity Sensor, 10 mm Detection, PNP NO, 10 → 30 V dc
- N° de stock RS:
- 896-7273
- Numéro d'article Distrelec:
- 304-05-963
- Fabricant:
- RS PRO
Sous-total (1 unité)*
73,60 €
(TVA exclue)
89,06 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 225 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 73,60 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 896-7273
- Numéro d'article Distrelec:
- 304-05-963
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Sensor Technology | Capacitive | |
| Body Style | Block | |
| Detection Range | 10 mm | |
| Output Function | NO | |
| Digital Switching Output Type | PNP | |
| Connection Type | Pre-Cabled | |
| Cable Length | 2m | |
| Supply Voltage | 10 → 30 V dc | |
| Length | 50mm | |
| IP Rating | IP67 | |
| Mounting Type | Non-Flush | |
| Housing Material | PBT | |
| Width | 20mm | |
| Maximum DC Voltage | 30V | |
| Minimum Operating Temperature | -10°C | |
| Switching Frequency | 30 Hz | |
| Reverse Polarity Protection | Yes | |
| Switching Current | 200 mA | |
| Maximum Switching Frequency | 30Hz | |
| Shielding | Unshielded | |
| Short Circuit Overload Protection | Yes | |
| Maximum Operating Temperature | +55°C | |
| Depth | 10mm | |
| Standards Met | CE, IEC | |
Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Sensor Technology Capacitive | ||
Body Style Block | ||
Detection Range 10 mm | ||
Output Function NO | ||
Digital Switching Output Type PNP | ||
Connection Type Pre-Cabled | ||
Cable Length 2m | ||
Supply Voltage 10 → 30 V dc | ||
Length 50mm | ||
IP Rating IP67 | ||
Mounting Type Non-Flush | ||
Housing Material PBT | ||
Width 20mm | ||
Maximum DC Voltage 30V | ||
Minimum Operating Temperature -10°C | ||
Switching Frequency 30 Hz | ||
Reverse Polarity Protection Yes | ||
Switching Current 200 mA | ||
Maximum Switching Frequency 30Hz | ||
Shielding Unshielded | ||
Short Circuit Overload Protection Yes | ||
Maximum Operating Temperature +55°C | ||
Depth 10mm | ||
Standards Met CE, IEC | ||
- Pays d'origine :
- CN
RS PRO Capacitive sensor - Block, PNP Output, 10 mm Detection, IP67, Cable Terminal
This RS PRO capacitive sensor is a proximity sensor you can use to detect metallic and non-metallic objects without physical contact. The sensor uses an electrical field to detect and measure materials that are conductive or have a greater dielectric constant than air.
This unit is made from polybutylene terephthalate (PBT) to ensure it's strong and resistant to chemicals and heat. It has an Ingress Protection (IP) rating of IP67, which means it's shielded against dust and temporary immersion in water. The sensor also features reverse polarity and short circuit overload protection, so you can be sure your equipment will be protected should something go wrong with the wiring.
This unit is made from polybutylene terephthalate (PBT) to ensure it's strong and resistant to chemicals and heat. It has an Ingress Protection (IP) rating of IP67, which means it's shielded against dust and temporary immersion in water. The sensor also features reverse polarity and short circuit overload protection, so you can be sure your equipment will be protected should something go wrong with the wiring.
Features and Benefits
• Block body style
• Detection range of 10 mm
• Dimensions of 50 (length) x 20 (width) x 10 mm (depth)
• PBT (Polybutylene Terephthalate) housing material
• IP (Ingress Protection) rating of IP67
• Maximum operating temperature of +55°C
• Minimum operating temperature of -10°C
• Non-flush mounting style
• Output type of PNP (Positive Negative Positive)
• Reverse polarity protection
• Capacitive sensor technology
• Shielded
• Short circuit overload protection
• Conforms to CE (Conformité Européenne) and IEC (International Electrotechnical Commission) standards
• Supply voltage of 10 to 30 V DC
• Switching current of 200 mA (milliamperes)
• Switching frequency of 30 Hz
• Cable terminal type
• Detection range of 10 mm
• Dimensions of 50 (length) x 20 (width) x 10 mm (depth)
• PBT (Polybutylene Terephthalate) housing material
• IP (Ingress Protection) rating of IP67
• Maximum operating temperature of +55°C
• Minimum operating temperature of -10°C
• Non-flush mounting style
• Output type of PNP (Positive Negative Positive)
• Reverse polarity protection
• Capacitive sensor technology
• Shielded
• Short circuit overload protection
• Conforms to CE (Conformité Européenne) and IEC (International Electrotechnical Commission) standards
• Supply voltage of 10 to 30 V DC
• Switching current of 200 mA (milliamperes)
• Switching frequency of 30 Hz
• Cable terminal type
Liens connexes
- Turck Capacitive Block Proximity Sensor PNP NO, 10 → 30 V dc
- RS PRO Capacitive Block Proximity Sensor PNP NO, 10 → 30 V dc
- RS PRO Capacitive Block Proximity Sensor PNP NO, 10 → 30 V dc
- RS PRO Capacitive Block Proximity Sensor PNP NO, 10 → 30 V dc
- RS PRO Capacitive Block Proximity Sensor PNP NO, 10 → 30 V dc
- SICK Capacitive Block Proximity Sensor PNP NO, 10 → 30 V dc
- SICK Capacitive Block Proximity Sensor PNP NO, 10 → 30 V dc
- Pepperl + Fuchs Capacitive Block Proximity Sensor PNP NO, 10 → 30 V dc
