Baumer Inductive Threaded Barrel Proximity Sensor, M12, 4 mm Detection, NAMUR, 5 → 30 V dc
- N° de stock RS:
- 763-8318
- Référence fabricant:
- IFRM 12X9103
- Fabricant:
- Baumer
Sous-total (1 unité)*
58,52 €
(TVA exclue)
70,81 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 10 unité(s) expédiée(s) à partir du 08 décembre 2025
- Plus 13 unité(s) expédiée(s) à partir du 08 décembre 2025
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 58,52 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 763-8318
- Référence fabricant:
- IFRM 12X9103
- Fabricant:
- Baumer
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Baumer | |
| Thread Size | M12 | |
| Sensor Technology | Inductive | |
| Body Style | Threaded Barrel | |
| Detection Range | 4 mm | |
| Digital Switching Output Type | NAMUR | |
| Cable Length | 2m | |
| Connection Type | Pre-Cabled | |
| Supply Voltage | 5 → 30 V dc | |
| Length | 34mm | |
| IP Rating | IP67 | |
| Mounting Type | Non-Flush | |
| Housing Material | Brass Nickel Plated | |
| Width | 12mm | |
| Maximum DC Voltage | 30V | |
| Hazardous Area Certification | ATEX | |
| Minimum Operating Temperature | -25°C | |
| Shielding | Unshielded | |
| Switching Frequency | 2 kHz | |
| Reverse Polarity Protection | No | |
| Switching Current | 4 mA | |
| Maximum Switching Frequency | 2kHz | |
| Maximum Operating Temperature | +75°C | |
| Short Circuit Overload Protection | No | |
| Standards Met | CE, cULus Listed, EAC | |
| Sélectionner tout | ||
|---|---|---|
Marque Baumer | ||
Thread Size M12 | ||
Sensor Technology Inductive | ||
Body Style Threaded Barrel | ||
Detection Range 4 mm | ||
Digital Switching Output Type NAMUR | ||
Cable Length 2m | ||
Connection Type Pre-Cabled | ||
Supply Voltage 5 → 30 V dc | ||
Length 34mm | ||
IP Rating IP67 | ||
Mounting Type Non-Flush | ||
Housing Material Brass Nickel Plated | ||
Width 12mm | ||
Maximum DC Voltage 30V | ||
Hazardous Area Certification ATEX | ||
Minimum Operating Temperature -25°C | ||
Shielding Unshielded | ||
Switching Frequency 2 kHz | ||
Reverse Polarity Protection No | ||
Switching Current 4 mA | ||
Maximum Switching Frequency 2kHz | ||
Maximum Operating Temperature +75°C | ||
Short Circuit Overload Protection No | ||
Standards Met CE, cULus Listed, EAC | ||
NAMUR Inductive Sensors
A range of inductive cylindrical sensors that are ATEX approved so can be used in hazardous areas and potentially explosive atmospheres.
ATEX approved, suitable for hazardous areas
Shielded or unshielded versions
Housing material: nickel plated brass or stainless steel
Shielded or unshielded versions
Housing material: nickel plated brass or stainless steel
Standards
II 1G Ex ia IIC T5/6
Approvals
PTB 03 ATEX 2146