Baumer Inductive Threaded Barrel Proximity Sensor, M8, 1.5 mm Detection, NAMUR, 5 → 30 V dc
- N° de stock RS:
- 703-3704
- Numéro d'article Distrelec:
- 304-00-778
- Référence fabricant:
- IFRM 08X9503
- Fabricant:
- Baumer
Sous-total (1 unité)*
83,28 €
(TVA exclue)
100,77 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 39 unité(s) prête(s) à être expédiée(s)
- Plus 16 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 83,28 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 703-3704
- Numéro d'article Distrelec:
- 304-00-778
- Référence fabricant:
- IFRM 08X9503
- Fabricant:
- Baumer
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Baumer | |
| Thread Size | M8 | |
| Sensor Technology | Inductive | |
| Body Style | Threaded Barrel | |
| Detection Range | 1.5 mm | |
| Digital Switching Output Type | NAMUR | |
| Cable Length | 2m | |
| Connection Type | Pre-Cabled | |
| Supply Voltage | 5 → 30 V dc | |
| IP Rating | IP67 | |
| Length | 25mm | |
| Mounting Type | Flush | |
| Width | 8mm | |
| Housing Material | Stainless Steel | |
| Maximum DC Voltage | 30V | |
| Hazardous Area Certification | ATEX | |
| Minimum Operating Temperature | -25°C | |
| Shielding | Shielded | |
| Maximum Operating Temperature | +75°C | |
| Maximum Switching Frequency | 5kHz | |
| Standards Met | CE, cULus Listed, EAC | |
| Short Circuit Overload Protection | Yes | |
| Reverse Polarity Protection | No | |
| Switching Current | 4 mA | |
| Switching Frequency | 5 kHz | |
| Sélectionner tout | ||
|---|---|---|
Marque Baumer | ||
Thread Size M8 | ||
Sensor Technology Inductive | ||
Body Style Threaded Barrel | ||
Detection Range 1.5 mm | ||
Digital Switching Output Type NAMUR | ||
Cable Length 2m | ||
Connection Type Pre-Cabled | ||
Supply Voltage 5 → 30 V dc | ||
IP Rating IP67 | ||
Length 25mm | ||
Mounting Type Flush | ||
Width 8mm | ||
Housing Material Stainless Steel | ||
Maximum DC Voltage 30V | ||
Hazardous Area Certification ATEX | ||
Minimum Operating Temperature -25°C | ||
Shielding Shielded | ||
Maximum Operating Temperature +75°C | ||
Maximum Switching Frequency 5kHz | ||
Standards Met CE, cULus Listed, EAC | ||
Short Circuit Overload Protection Yes | ||
Reverse Polarity Protection No | ||
Switching Current 4 mA | ||
Switching Frequency 5 kHz | ||
- Pays d'origine :
- CH
NAMUR Inductive Sensors
A range of inductive cylindrical sensors that are ATEX approved so can be used in hazardous areas and potentially explosive atmospheres.
ATEX approved, suitable for hazardous areas
Shielded or unshielded versions
Housing material: nickel plated brass or stainless steel
Shielded or unshielded versions
Housing material: nickel plated brass or stainless steel
Standards
II 1G Ex ia IIC T5/6
Approvals
PTB 03 ATEX 2146
Liens connexes
- Baumer Inductive Threaded Barrel Proximity Sensor 1.5 mm Detection 5 → 30 V dc
- Baumer Inductive Smooth Barrel Proximity Sensor NAMUR, 5 → 30 V dc
- Baumer Inductive Threaded Barrel Proximity Sensor 2 mm Detection 5 → 30 V dc
- Baumer Inductive Threaded Barrel Proximity Sensor 5 mm Detection 10 → 30 V dc
- Baumer Inductive Threaded Barrel Proximity Sensor 10 → 30 V dc
- Baumer Inductive Threaded Barrel Proximity Sensor 2 mm Detection 6 → 30 V dc
- Baumer Inductive Threaded Barrel Proximity Sensor 2 mm Detection 10 → 30 V dc
- Baumer Inductive Threaded Barrel Proximity Sensor 4 mm Detection 6 → 36 V dc