Schmersal Inductive Threaded Barrel Proximity Sensor, M8, 2 mm Detection, PNP NO, 10 → 30 V dc

N° de stock RS:: 470-4380
Référence fabricant:: IFL-2-8M-10P
Fabricant:: Schmersal

Schmersal Inductive Threaded Barrel Proximity Sensor, M8, 2 mm Detection, PNP NO, 10 → 30 V dc

Sous-total (1 unité)*

86,66 €

(TVA exclue)

104,86 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 75,00 €

En stock

1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 2 unité(s) expédiée(s) à partir du 15 décembre 2025
Plus 5 unité(s) expédiée(s) à partir du 12 janvier 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	86,66 €

*Prix donné à titre indicatif

N° de stock RS:: 470-4380
Référence fabricant:: IFL-2-8M-10P
Fabricant:: Schmersal

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Schmersal
	Thread Size	M8
	Sensor Technology	Inductive
	Body Style	Threaded Barrel
	Detection Range	2 mm
	Output Function	NO
	Digital Switching Output Type	PNP
	Cable Length	2m
	Connection Type	Pre-Cabled
	Supply Voltage	10 → 30 V dc
	IP Rating	IP67
	Length	42mm
	Mounting Type	Flush
	Housing Material	Brass
	Maximum DC Voltage	30V
	Minimum Operating Temperature	-25°C
	Short Circuit Overload Protection	Yes
	Depth	8mm
	Maximum Operating Temperature	+70°C
	Shielding	Shielded
	Maximum Switching Frequency	3kHz
	Switching Current	200 mA
	Reverse Polarity Protection	Yes
	Switching Frequency	3 kHz
	Standards Met	CE, EN 60947-5-2
	Series	IFL

	Sélectionner tout
	Marque Schmersal
	Thread Size M8
	Sensor Technology Inductive
	Body Style Threaded Barrel
	Detection Range 2 mm
	Output Function NO
	Digital Switching Output Type PNP
	Cable Length 2m
	Connection Type Pre-Cabled
	Supply Voltage 10 → 30 V dc
	IP Rating IP67
	Length 42mm
	Mounting Type Flush
	Housing Material Brass
	Maximum DC Voltage 30V
	Minimum Operating Temperature -25°C
	Short Circuit Overload Protection Yes
	Depth 8mm
	Maximum Operating Temperature +70°C
	Shielding Shielded
	Maximum Switching Frequency 3kHz
	Switching Current 200 mA
	Reverse Polarity Protection Yes
	Switching Frequency 3 kHz
	Standards Met CE, EN 60947-5-2
	Series IFL

Statut RoHS : Exempté

Inductive proximity switch, flush, PNP

Flush-mountable
PNP type
NOC function

Schmersal Inductive Proximity Sensor, 30V DC, 200mA - IFL Series - IFL-2-8M-10P

Precisely detect and position metal objects with this inductive proximity sensor from Schmersal. Its non-contact electronic switching function means there's no bounce when switching direct current, ensuring reliable and consistent sensing. The device features integrated short circuit and current overload protection to increase safety. The nickel-plated brass housing offers resistance against corrosion, so the component is suitable for use in humid environments. As it doesn't make contact with other objects, it's less likely to be damaged by mechanical wear, ensuring long-lasting, reliable operation.

Features & Benefits

• Abrasion-resistant PVC (polyvinyl chloride) cable mantle for durability
• Meets IEC (International Electrotechnical Commission) safety standards for low-voltage switchgear
• IP67 (ingress protection) rating means it's dust-tight and water-resistant for use in demanding environments

Applications

• Automated production lines
• Hoisting and lifting
• Packaging warehouses
• Safety systems

How does a proximity sensor work?

A proximity sensor uses an oscillating circuit to generate a concentrated, high-frequency electromagnetic field. This determines the presence of ferrous metal objects. It converts a change in its oscillating amplitude into an electrical signal, which then causes the sensor to change its switching state.