Baumer Inductive Block Proximity Sensor, 0.8 mm Detection, PNP NO, 10 → 30 V dc
- N° de stock RS:
- 446-0169
- Numéro d'article Distrelec:
- 300-79-018
- Référence fabricant:
- IFFM 04P1501/O1L
- Fabricant:
- Baumer
Visuel non contractuel
Sous-total (1 unité)*
131,67 €
(TVA exclue)
159,32 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 21 unité(s) prête(s) à être expédiée(s)
- Plus 9 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 131,67 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 446-0169
- Numéro d'article Distrelec:
- 300-79-018
- Référence fabricant:
- IFFM 04P1501/O1L
- Fabricant:
- Baumer
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Baumer | |
| Sensor Technology | Inductive | |
| Detection Range | 0.8 mm | |
| Body Style | Block | |
| Digital Switching Output Type | PNP | |
| Output Function | NO | |
| Cable Length | 2m | |
| Connection Type | Pre-Cabled | |
| Supply Voltage | 10 → 30 V dc | |
| Length | 22mm | |
| IP Rating | IP67 | |
| Mounting Type | Flush | |
| Housing Material | Stainless Steel | |
| Width | 4mm | |
| Maximum DC Voltage | 30V | |
| Minimum Operating Temperature | -25°C | |
| Shielding | Unshielded | |
| Switching Current | 100 mA | |
| Standards Met | CE, cULus Listed, EAC | |
| Maximum Switching Frequency | 3kHz | |
| Short Circuit Overload Protection | Yes | |
| Depth | 4mm | |
| Switching Frequency | 3 kHz | |
| Reverse Polarity Protection | Yes | |
| Maximum Operating Temperature | +75°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Baumer | ||
Sensor Technology Inductive | ||
Detection Range 0.8 mm | ||
Body Style Block | ||
Digital Switching Output Type PNP | ||
Output Function NO | ||
Cable Length 2m | ||
Connection Type Pre-Cabled | ||
Supply Voltage 10 → 30 V dc | ||
Length 22mm | ||
IP Rating IP67 | ||
Mounting Type Flush | ||
Housing Material Stainless Steel | ||
Width 4mm | ||
Maximum DC Voltage 30V | ||
Minimum Operating Temperature -25°C | ||
Shielding Unshielded | ||
Switching Current 100 mA | ||
Standards Met CE, cULus Listed, EAC | ||
Maximum Switching Frequency 3kHz | ||
Short Circuit Overload Protection Yes | ||
Depth 4mm | ||
Switching Frequency 3 kHz | ||
Reverse Polarity Protection Yes | ||
Maximum Operating Temperature +75°C | ||
- Pays d'origine :
- CH
3 Wire Rectangular Sensor (0.8mm)
Stainless Steel housed with EP sensing face
2m Pre-Wired
2m Pre-Wired
Block Style
Flush mounting, embeddable sensors with IP67 protection and an operating temperature range of -25 to +75°C. All have short circuit and reverse polarity protection and provide an LED indication of the on/off status.
Liens connexes
- Baumer Inductive Block Proximity Sensor PNP NO, 6 → 36 V dc
- Baumer Inductive Rectangular Inductive Proximity Sensor 8 mm Detection 30 V dc
- Baumer Inductive Block Proximity Sensor PNP NO, 10 → 50 V dc
- Baumer Inductive Block Proximity Sensor 5 mm Detection 10 → 50 V dc
- Baumer Inductive Threaded Barrel Proximity Sensor 2 mm Detection 6 → 30 V dc
- Baumer PNP Inductive Sensor 2 mm Detection Range 10 → 30 V dc, IP67
- Baumer Inductive Smooth Barrel Proximity Sensor PNP NO, 10 → 30 V dc
- Baumer Proximity Rectangular Inductive Proximity Sensor 4 mm Detection NO, 10 → 30 V dc