Telemecanique Sensors Inductive Rectangular Proximity Sensor, 20 mm Detection, PNP NO+NC, 12 → 24 V dc
- N° de stock RS:
- 221-1737
- Référence fabricant:
- XS9C4A1PCP20
- Fabricant:
- Telemecanique Sensors
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 221-1737
- Référence fabricant:
- XS9C4A1PCP20
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Sensor Technology | Inductive | |
| Body Style | Rectangular | |
| Detection Range | 20 mm | |
| Digital Switching Output Type | PNP | |
| Output Function | NO+NC | |
| Connection Type | Screw Terminal | |
| Supply Voltage | 12 → 24 V dc | |
| IP Rating | IP65, IP67, IP69K | |
| Length | 117mm | |
| Mounting Type | Flush | |
| Maximum DC Voltage | 24V | |
| Minimum Operating Temperature | -25°C | |
| Shielding | Unshielded | |
| Depth | 40mm | |
| Maximum Operating Temperature | +70°C | |
| Series | XS | |
| Switching Frequency | 250 Hz | |
| Switching Current | 200 mA | |
| Maximum Switching Frequency | 250Hz | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Sensor Technology Inductive | ||
Body Style Rectangular | ||
Detection Range 20 mm | ||
Digital Switching Output Type PNP | ||
Output Function NO+NC | ||
Connection Type Screw Terminal | ||
Supply Voltage 12 → 24 V dc | ||
IP Rating IP65, IP67, IP69K | ||
Length 117mm | ||
Mounting Type Flush | ||
Maximum DC Voltage 24V | ||
Minimum Operating Temperature -25°C | ||
Shielding Unshielded | ||
Depth 40mm | ||
Maximum Operating Temperature +70°C | ||
Series XS | ||
Switching Frequency 250 Hz | ||
Switching Current 200 mA | ||
Maximum Switching Frequency 250Hz | ||
- Pays d'origine :
- ID
The Schneider Electric XS series inductive proximity sensor is solely for the detection of metal objects. It basically comprises an oscillator whose windings constitute the sensing face. An alternating magnetic field is generated in front of these windings. When a metal object is placed within the magnetic field generated by the sensor, the resulting currents induced form an additional load and the oscillations cease. This causes the output driver to operate and, depending on the sensor type, a normally open (NO) or normally closed (NC) output signal is produced.
Body type Fixed
Detector flush mounting
acceptance
Flush mountable
Material Plastic
Enclosure material PBT
Type of output signal Discrete
Wiring technique 4-wire
Discrete output function 1 NO + 1 NC
Output circuit type DC
Detector flush mounting
acceptance
Flush mountable
Material Plastic
Enclosure material PBT
Type of output signal Discrete
Wiring technique 4-wire
Discrete output function 1 NO + 1 NC
Output circuit type DC