Telemecanique Sensors Inductive Block Proximity Sensor, 40 mm Detection, 2-Wire NO, 12 → 24 V dc
- N° de stock RS:
- 221-1708
- Référence fabricant:
- XS7D1A1DAL2
- Fabricant:
- Telemecanique Sensors
Sous-total (1 unité)*
98,88 €
(TVA exclue)
119,64 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 7 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 98,88 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 221-1708
- Référence fabricant:
- XS7D1A1DAL2
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Sensor Technology | Inductive | |
| Detection Range | 40 mm | |
| Body Style | Block | |
| Digital Switching Output Type | 2-Wire | |
| Output Function | NO | |
| Connection Type | Pre-Cabled | |
| Cable Length | 2m | |
| Supply Voltage | 12 → 24 V dc | |
| Length | 26mm | |
| IP Rating | IP68 | |
| Mounting Type | Flush | |
| Maximum DC Voltage | 24V | |
| Minimum Operating Temperature | -25°C | |
| Series | XS | |
| Maximum Switching Frequency | 100Hz | |
| Maximum Operating Temperature | +70°C | |
| Switching Frequency | 100 Hz | |
| Shielding | Unshielded | |
| Depth | 26mm | |
| Switching Current | 100 mA | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Sensor Technology Inductive | ||
Detection Range 40 mm | ||
Body Style Block | ||
Digital Switching Output Type 2-Wire | ||
Output Function NO | ||
Connection Type Pre-Cabled | ||
Cable Length 2m | ||
Supply Voltage 12 → 24 V dc | ||
Length 26mm | ||
IP Rating IP68 | ||
Mounting Type Flush | ||
Maximum DC Voltage 24V | ||
Minimum Operating Temperature -25°C | ||
Series XS | ||
Maximum Switching Frequency 100Hz | ||
Maximum Operating Temperature +70°C | ||
Switching Frequency 100 Hz | ||
Shielding Unshielded | ||
Depth 26mm | ||
Switching Current 100 mA | ||
- Pays d'origine :
- ID
The Schneider Electric XS series inductive proximity sensor is solely for the detection of metal objects. It basically comprises an oscillator whose windings constitute the sensing face. An alternating magnetic field is generated in front of these windings. When a metal object is placed within the magnetic field generated by the sensor, the resulting currents induced form an additional load and the oscillations cease. This causes the output driver to operate and, depending on the sensor type, a normally open (NO) or normally closed (NC) output signal is produced.
Body type Fixed
Detector flush mounting
acceptance
Flush mountable
Material Plastic
Enclosure material PBT
Type of output signal Discrete
Wiring technique 2-wire
Discrete output function 1 NO
Output circuit type DC
Electrical connection cable
Cable length 2 m
Detector flush mounting
acceptance
Flush mountable
Material Plastic
Enclosure material PBT
Type of output signal Discrete
Wiring technique 2-wire
Discrete output function 1 NO
Output circuit type DC
Electrical connection cable
Cable length 2 m
Liens connexes
- Telemecanique Sensors Inductive Rectangular Proximity Sensor PNP NO, 12 → 24 V dc
- Telemecanique Sensors Inductive Block Proximity Sensor 2-Wire NO, 12 → 24 V dc
- Telemecanique Sensors Inductive Threaded Barrel Proximity Sensor 40 mm Detection 12 → 24 V dc
- Telemecanique Sensors Inductive Flat Proximity Sensor 2-Wire NO/NC, 24 → 240 V dc
- Telemecanique Sensors Inductive Rectangular Proximity Sensor PNP NO+NC, 12 → 48 V dc
- Telemecanique Sensors Inductive Rectangular Proximity Sensor NPN NO+NC, 12 → 48 V dc
- Telemecanique Sensors Inductive Flat Proximity Sensor PNP NO+NC, 12 → 48 V dc
- Telemecanique Sensors Inductive Block Proximity Sensor 2-Wire NO, 12 → 48 V dc