Telemecanique Sensors Inductive Threaded Barrel Proximity Sensor, M5, 1 mm Detection, PNP NO, 5 → 24 V dc
- N° de stock RS:
- 221-1641
- Référence fabricant:
- XS1N05PA310L1
- Fabricant:
- Telemecanique Sensors
Informations sur le stock actuellement non accessibles
- N° de stock RS:
- 221-1641
- Référence fabricant:
- XS1N05PA310L1
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Thread Size | M5 | |
| Sensor Technology | Inductive | |
| Body Style | Threaded Barrel | |
| Detection Range | 1 mm | |
| Digital Switching Output Type | PNP | |
| Output Function | NO | |
| Connection Type | Pre-Cabled | |
| Cable Length | 5m | |
| Supply Voltage | 5 → 24 V dc | |
| IP Rating | IP67 | |
| Length | 29mm | |
| Mounting Type | Flush | |
| Maximum DC Voltage | 24V | |
| Minimum Operating Temperature | -25°C | |
| Maximum Switching Frequency | 5kHz | |
| Shielding | Shielded | |
| Series | XS | |
| Switching Frequency | 5 kHz | |
| Switching Current | 100 mA | |
| Maximum Operating Temperature | +70°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Thread Size M5 | ||
Sensor Technology Inductive | ||
Body Style Threaded Barrel | ||
Detection Range 1 mm | ||
Digital Switching Output Type PNP | ||
Output Function NO | ||
Connection Type Pre-Cabled | ||
Cable Length 5m | ||
Supply Voltage 5 → 24 V dc | ||
IP Rating IP67 | ||
Length 29mm | ||
Mounting Type Flush | ||
Maximum DC Voltage 24V | ||
Minimum Operating Temperature -25°C | ||
Maximum Switching Frequency 5kHz | ||
Shielding Shielded | ||
Series XS | ||
Switching Frequency 5 kHz | ||
Switching Current 100 mA | ||
Maximum Operating Temperature +70°C | ||
- Pays d'origine :
- FR
The Schneider Electric XS series inductive proximity sensor is solely for the detection of metal objects. It basically comprises an oscillator whose windings constitute the sensing face. An alternating magnetic field is generated in front of these windings. When a metal object is placed within the magnetic field generated by the sensor, the resulting currents induced form an additional load and the oscillations cease. This causes the output driver to operate and, depending on the sensor type, a normally open (NO) or normally closed (NC) output signal is produced.
Body type Fixed
Detector flush mounting
acceptance
Flush mountable
Material Metal
Type of output signal Discrete
Wiring technique 3-wire
[Sn] nominal sensing
distance
1 mm
Discrete output function 1 NO
Output circuit type DC
Cable Length 5m
Detector flush mounting
acceptance
Flush mountable
Material Metal
Type of output signal Discrete
Wiring technique 3-wire
[Sn] nominal sensing
distance
1 mm
Discrete output function 1 NO
Output circuit type DC
Cable Length 5m