Telemecanique Sensors Inductive Threaded Barrel Proximity Sensor, M30, 5 mm Detection, 2-Wire NO, 24 → 240 V
- N° de stock RS:
- 221-1638
- Référence fabricant:
- XS1M30MA250L2
- Fabricant:
- Telemecanique Sensors
Sous-total (1 unité)*
181,19 €
(TVA exclue)
219,24 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 181,19 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 221-1638
- Référence fabricant:
- XS1M30MA250L2
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Thread Size | M30 | |
| Sensor Technology | Inductive | |
| Detection Range | 5 mm | |
| Body Style | Threaded Barrel | |
| Digital Switching Output Type | 2-Wire | |
| Output Function | NO | |
| Connection Type | Pre-Cabled | |
| Cable Length | 2m | |
| Supply Voltage | 24 → 240 V ac/dc | |
| Length | 60mm | |
| IP Rating | IP68 | |
| Mounting Type | Flush | |
| Maximum DC Voltage | 210V | |
| Minimum Operating Temperature | -25°C | |
| Shielding | Shielded | |
| Switching Current | 300 mA, 200 mA | |
| Maximum Switching Frequency | 2 kHz, 25Hz | |
| Series | XS | |
| Depth | 30mm | |
| Maximum Operating Temperature | +70°C | |
| Switching Frequency | 2 kHz, 25 Hz | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Thread Size M30 | ||
Sensor Technology Inductive | ||
Detection Range 5 mm | ||
Body Style Threaded Barrel | ||
Digital Switching Output Type 2-Wire | ||
Output Function NO | ||
Connection Type Pre-Cabled | ||
Cable Length 2m | ||
Supply Voltage 24 → 240 V ac/dc | ||
Length 60mm | ||
IP Rating IP68 | ||
Mounting Type Flush | ||
Maximum DC Voltage 210V | ||
Minimum Operating Temperature -25°C | ||
Shielding Shielded | ||
Switching Current 300 mA, 200 mA | ||
Maximum Switching Frequency 2 kHz, 25Hz | ||
Series XS | ||
Depth 30mm | ||
Maximum Operating Temperature +70°C | ||
Switching Frequency 2 kHz, 25 Hz | ||
- Pays d'origine :
- FR
The Schneider Electric XS series inductive proximity sensor is solely for the detection of metal objects. It basically comprises an oscillator whose windings constitute the sensing face. An alternating magnetic field is generated in front of these windings. When a metal object is placed within the magnetic field generated by the sensor, the resulting currents induced form an additional load and the oscillations cease. This causes the output driver to operate and, depending on the sensor type, a normally open (NO) or normally closed (NC) output signal is produced.
Wiring configuration 2-wire
Output circuit type AC/DC
Protection type Short-circuit protection multi voltage
Device application 2-wire DC short-circuit protection
Body type Fixed
Detector flush mounting
acceptance
Flush mountable
Material Metal
Type of output signal Discrete
Wiring technique 2-wire
[Sn] nominal sensing
distance
5 mm
Output circuit type AC/DC
Protection type Short-circuit protection multi voltage
Device application 2-wire DC short-circuit protection
Body type Fixed
Detector flush mounting
acceptance
Flush mountable
Material Metal
Type of output signal Discrete
Wiring technique 2-wire
[Sn] nominal sensing
distance
5 mm