Baumer Inductive Threaded Barrel Proximity Sensor, M12, 6 mm Detection, PNP NO, 6 → 36 V dc
- N° de stock RS:
- 103-8486
- Référence fabricant:
- IR12.P06S-F50.PO1Z.7BO
- Fabricant:
- Baumer
Sous-total (1 unité)*
78,78 €
(TVA exclue)
95,32 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 10 unité(s) prête(s) à être expédiée(s)
- Plus 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 78,78 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 103-8486
- Référence fabricant:
- IR12.P06S-F50.PO1Z.7BO
- Fabricant:
- Baumer
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Baumer | |
| Thread Size | M12 | |
| Sensor Technology | Inductive | |
| Body Style | Threaded Barrel | |
| Detection Range | 6 mm | |
| Digital Switching Output Type | PNP | |
| Output Function | NO | |
| Connection Type | M12 | |
| Supply Voltage | 6 → 36 V dc | |
| Length | 50mm | |
| IP Rating | IP67 | |
| Mounting Type | Flush | |
| Housing Material | Brass Nickel Plated | |
| Width | 12mm | |
| Maximum DC Voltage | 36V | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | +75°C | |
| Maximum Switching Frequency | 1kHz | |
| Shielding | Shielded | |
| Switching Current | 100 mA | |
| Short Circuit Overload Protection | Yes | |
| Switching Frequency | 1 kHz | |
| Standards Met | CE, cULus Listed, EAC | |
| Reverse Polarity Protection | Yes | |
| Sélectionner tout | ||
|---|---|---|
Marque Baumer | ||
Thread Size M12 | ||
Sensor Technology Inductive | ||
Body Style Threaded Barrel | ||
Detection Range 6 mm | ||
Digital Switching Output Type PNP | ||
Output Function NO | ||
Connection Type M12 | ||
Supply Voltage 6 → 36 V dc | ||
Length 50mm | ||
IP Rating IP67 | ||
Mounting Type Flush | ||
Housing Material Brass Nickel Plated | ||
Width 12mm | ||
Maximum DC Voltage 36V | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature +75°C | ||
Maximum Switching Frequency 1kHz | ||
Shielding Shielded | ||
Switching Current 100 mA | ||
Short Circuit Overload Protection Yes | ||
Switching Frequency 1 kHz | ||
Standards Met CE, cULus Listed, EAC | ||
Reverse Polarity Protection Yes | ||
- Pays d'origine :
- CH
M12 detectors
M12 standard inductive detectors, flush mountable.
"Normally open" PNP switching function.
Equipped with a red LED status display.
Protected against short circuits and polarity reversal.
Connected via 2 metre PVC cable or via M12 screwed connector, axial output.
"Normally open" PNP switching function.
Equipped with a red LED status display.
Protected against short circuits and polarity reversal.
Connected via 2 metre PVC cable or via M12 screwed connector, axial output.
Liens connexes
- Baumer Inductive Threaded Barrel Proximity Sensor 6 mm Detection 6 → 36 V dc
- Baumer Proximity Barrel Inductive Proximity Sensor 4 mm Detection NO, 5 → 36 V
- Baumer Inductive Threaded Barrel Proximity Sensor 10 mm Detection 6 → 36 V dc
- Baumer Inductive Threaded Barrel Proximity Sensor 6 mm Detection 6 → 36 V dc
- Baumer Inductive Proximity Sensor 6 mm Detection, 6 →36 V dc
- Baumer Proximity Barrel Inductive Proximity Sensor 0 → 4 mm Detection 0-10 V, 12 → 36 V dc
- Baumer Inductive Threaded Barrel Proximity Sensor 6 mm Detection 8 → 36 V dc
- Baumer Proximity Barrel Inductive Proximity Sensor 0 → 6 mm Detection 0-10 V, 12 → 36 V dc
