Broadcom APDS Proximity Sensor IC 200 mm 2.4 V 3.6V 8 QFN
- N° de stock RS:
- 230-5339P
- Référence fabricant:
- APDS-9700-020
- Fabricant:
- Broadcom
Sous-total 5 unités (conditionné en bande continue)*
10,38 €
(TVA exclue)
12,56 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 080 unité(s) expédiée(s) à partir du 10 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 5 + | 2,076 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 230-5339P
- Référence fabricant:
- APDS-9700-020
- Fabricant:
- Broadcom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broadcom | |
| Product Type | Proximity Sensor IC | |
| Maximum Switching Frequency | 3kHz | |
| Maximum Output Current | 2mA | |
| Maximum Output Voltage | 0.3V | |
| Sensing Distance | 200mm | |
| Output Type | Analogue, Digital | |
| Mount Type | Through Hole | |
| Package Type | QFN | |
| Pin Count | 8 | |
| Length | 2mm | |
| Height | 0.55mm | |
| Width | 2mm | |
| Series | APDS | |
| Minimum Operating Temperature | -40°C | |
| Minimum Supply Voltage | 2.4V | |
| Maximum Operating Temperature | 105°C | |
| Automotive Standard | No | |
| Maximum Supply Voltage | 3.6V | |
| Sélectionner tout | ||
|---|---|---|
Marque Broadcom | ||
Product Type Proximity Sensor IC | ||
Maximum Switching Frequency 3kHz | ||
Maximum Output Current 2mA | ||
Maximum Output Voltage 0.3V | ||
Sensing Distance 200mm | ||
Output Type Analogue, Digital | ||
Mount Type Through Hole | ||
Package Type QFN | ||
Pin Count 8 | ||
Length 2mm | ||
Height 0.55mm | ||
Width 2mm | ||
Series APDS | ||
Minimum Operating Temperature -40°C | ||
Minimum Supply Voltage 2.4V | ||
Maximum Operating Temperature 105°C | ||
Automotive Standard No | ||
Maximum Supply Voltage 3.6V | ||
The Broadcom APDS series is a signal conditioning IC that enhances the performance and robustness of the optical sensors used for proximity or object detection. It is a single chip solution that consists of a LED driver circuit, sunlight cancellation and built-in LED stuck high protection circuit integrated into a single chip.
Low power consumption
Complete shutdown mode
Artificial light immunity
Wide bandwidth trans-impedance amplifier
Built in hysteresis comparator for digital output