KEMET PL Proximity Sensor 5 m 2 V 15V 4 Tape & Reel
- N° de stock RS:
- 205-5825P
- Référence fabricant:
- PL-Q873-02
- Fabricant:
- KEMET
Offre groupée disponible
Consulter les options de prix de grosSous-total 10 unités (conditionné en bande continue)*
53,50 €
(TVA exclue)
64,70 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 27 avril 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 10 - 99 | 5,35 € |
| 100 - 249 | 4,45 € |
| 250 - 499 | 3,66 € |
| 500 + | 3,56 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 205-5825P
- Référence fabricant:
- PL-Q873-02
- Fabricant:
- KEMET
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | KEMET | |
| Product Type | Proximity Sensor | |
| Maximum Output Current | 20A | |
| Maximum Output Voltage | 0.55V | |
| Sensing Distance | 5m | |
| Mount Type | Surface | |
| Package Type | Tape & Reel | |
| Pin Count | 4 | |
| Width | 4.8mm | |
| Height | 1.7mm | |
| Length | 5mm | |
| Maximum Supply Voltage | 15V | |
| Minimum Operating Temperature | -40°C | |
| Series | PL | |
| Automotive Standard | No | |
| Maximum Operating Temperature | 70°C | |
| Minimum Supply Voltage | 2V | |
| Sélectionner tout | ||
|---|---|---|
Marque KEMET | ||
Product Type Proximity Sensor | ||
Maximum Output Current 20A | ||
Maximum Output Voltage 0.55V | ||
Sensing Distance 5m | ||
Mount Type Surface | ||
Package Type Tape & Reel | ||
Pin Count 4 | ||
Width 4.8mm | ||
Height 1.7mm | ||
Length 5mm | ||
Maximum Supply Voltage 15V | ||
Minimum Operating Temperature -40°C | ||
Series PL | ||
Automotive Standard No | ||
Maximum Operating Temperature 70°C | ||
Minimum Supply Voltage 2V | ||
The Kemet Pyroelectric Infrared Sensors use the pyroelectric effect of ceramic by absorbing infrared rays emitted from the human body. This detects the natural infrared signature produced by humans. Also, it can detect infrared rays without using lenses. Due to the absence of a lens, KEMET’s Pyro Sensor is low profile, as it does not protrude, which makes it ideal for gathering visual requirements. With KEMET’s proprietary piezoelectric ceramic material and element structure of the Pyroelectric Infrared Sensor, humans can be detected through glass or resin. This allows more freedom in the design of the outer appearance of the end product.
Reflow capable SMD configuration
Lens not required
A lens can be attached to the sensor
Wide view angle up to ±60 degrees (lens less)
View angle up to ±37/±28 degrees (with lens)
Detection possible through glass or resin
Low power consumption, down in the