PL-Q873-02 KEMET, PL, 5000mm 4-Pin Tape & Reel
- N° de stock RS:
- 205-5824
- Référence fabricant:
- PL-Q873-02
- Fabricant:
- KEMET
Sous-total (1 bobine de 2000 unités)*
7 734,00 €
(TVA exclue)
9 358,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 22 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2000 + | 3,867 € | 7 734,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 205-5824
- Référence fabricant:
- PL-Q873-02
- Fabricant:
- KEMET
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | KEMET | |
| Sensor Type | Proximity Sensor | |
| Maximum Output Current | 20µA | |
| Maximum Output Voltage | 0.55 V | |
| Sensing Distance | 5000mm | |
| Package Type | Tape & Reel | |
| Pin Count | 4 | |
| Series | PL | |
| Sélectionner tout | ||
|---|---|---|
Marque KEMET | ||
Sensor Type Proximity Sensor | ||
Maximum Output Current 20µA | ||
Maximum Output Voltage 0.55 V | ||
Sensing Distance 5000mm | ||
Package Type Tape & Reel | ||
Pin Count 4 | ||
Series PL | ||
The Kemet Pyroelectric Infrared Sensors use the pyroelectric effect of ceramic by absorbing infrared rays emitted from the human body. This detects the natural infrared signature produced by humans. Also, it can detect infrared rays without using lenses. Due to the absence of a lens, KEMET’s Pyro Sensor is low profile, as it does not protrude, which makes it ideal for gathering visual requirements. With KEMET’s proprietary piezoelectric ceramic material and element structure of the Pyroelectric Infrared Sensor, humans can be detected through glass or resin. This allows more freedom in the design of the outer appearance of the end product.
Reflow capable SMD configuration
Lens not required
A lens can be attached to the sensor
Wide view angle up to ±60 degrees (lens less)
View angle up to ±37/±28 degrees (with lens)
Detection possible through glass or resin
Low power consumption, down in the
Lens not required
A lens can be attached to the sensor
Wide view angle up to ±60 degrees (lens less)
View angle up to ±37/±28 degrees (with lens)
Detection possible through glass or resin
Low power consumption, down in the