Reliance Water Controls 10 bar Temperature & Pressure Relief Valve With 15 to 22 mm²
- N° de stock RS:
- 794-8439
- Référence fabricant:
- PTEM550759
- Fabricant:
- Reliance Water Controls
Visuel non contractuel
Sous-total (1 unité)*
120,48 €
(TVA exclue)
145,78 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 80,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 120,48 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 794-8439
- Référence fabricant:
- PTEM550759
- Fabricant:
- Reliance Water Controls
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Reliance Water Controls | |
| Product Type | Temperature & Pressure Relief Valve | |
| Maximum Set Pressure | 10bar | |
| Inlet Connection Type | MBSP | |
| Maximum Operating Temperature | 100°C | |
| Outlet Connection Type | Threaded | |
| Outlet Port Size | 15 to 22 mm² | |
| Body Material | Brass | |
| Inlet Thread Standard | MBSP | |
| Minimum Set Pressure | 4bar | |
| Application | Protection Against Over Pressurisation In Unvented Hot Water Systems | |
| Inlet Port Gender | Male | |
| Standards/Approvals | WRAS No. 0910311Approval, BS EN 1490Standard | |
| Sélectionner tout | ||
|---|---|---|
Marque Reliance Water Controls | ||
Product Type Temperature & Pressure Relief Valve | ||
Maximum Set Pressure 10bar | ||
Inlet Connection Type MBSP | ||
Maximum Operating Temperature 100°C | ||
Outlet Connection Type Threaded | ||
Outlet Port Size 15 to 22 mm² | ||
Body Material Brass | ||
Inlet Thread Standard MBSP | ||
Minimum Set Pressure 4bar | ||
Application Protection Against Over Pressurisation In Unvented Hot Water Systems | ||
Inlet Port Gender Male | ||
Standards/Approvals WRAS No. 0910311Approval, BS EN 1490Standard | ||
Statut RoHS : Exempté
- Pays d'origine :
- US
Full Cartridge Pressure and Temperature Relief Valve
All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system.
Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again.
The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used
Protect against temperature rising above 95ﾟC
Prevent over pressurisation
Twist toop cartridge design for easy servicing
Range of different pressure settings and different probe lenghts
Note
(7948432 no PTFE), (7948439, 7948448 and 7948457 with probe)
Approvals
WRAS
Liens connexes
- Reliance Water Controls 10 bar Temperature & Pressure Relief Valve With 15 to 22 mm²
- Reliance Water Controls 4.5 bar Temperature & Pressure Relief Valve With 1/2 in 1/2 in
- Reliance Water Controls 3 bar Pressure Relief Valve With 1/2 in 1/2 in
- Reliance Water Controls 3 bar Pressure Relief Valve With 3/4 in 3/4 in
- Reliance Water Controls 10 bar Differential Bypass Valve With 22 mm 22 mm
- Reliance Water Controls 16 bar Anti-Vacuum Valve With
- Reliance 10bar Temperature and Pressure Relief Valve With Male BSP 1/2 in BSP Male Connection
- Reliance Water Controls 220/240 V 2 Port Motorised Valve 0.69 bar