Teledyne LeCroy CP500 Oscilloscope Probe, Current Type, 2 MHz
- N° de stock RS:
- 724-0918
- Numéro d'article Distrelec:
- 176-25-928
- Référence fabricant:
- CP500
- Fabricant:
- Teledyne LeCroy
Sous-total (1 unité)*
7 520,94 €
(TVA exclue)
9 100,34 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 7 520,94 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 724-0918
- Numéro d'article Distrelec:
- 176-25-928
- Référence fabricant:
- CP500
- Fabricant:
- Teledyne LeCroy
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Teledyne LeCroy | |
| Probe Type | Current | |
| Product Type | Oscilloscope Probe | |
| Bandwidth | 2MHz | |
| Model Number | CP500 | |
| Safety Category Level | CAT II, CAT III | |
| Safety Category Voltage | 500V | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Teledyne LeCroy | ||
Probe Type Current | ||
Product Type Oscilloscope Probe | ||
Bandwidth 2MHz | ||
Model Number CP500 | ||
Safety Category Level CAT II, CAT III | ||
Safety Category Voltage 500V | ||
Standards/Approvals No | ||
Statut RoHS non applicable
- Pays d'origine :
- JP
Teledyne LeCroy Current Probe & Clamp
The Teledyne LeCroy 6m current probe is a state of the art device created for easy, highly accurate current measurements. The compact probes offer wide bandwidth with over-current protection and utilize a combination of Hall Effect and transformer technology that enables you to take measurements on DC, AC, and impulse currents. It also has a 2MHz bandwidth and is designed to measure continuous currents up to 500Amp.
Note:
The CP030 (801-4858 ) and CP031 (724-0911 ) are compatible with LeCroy X-stream oscilloscopes running firmware version 4.3.1.1 or greater. Their minimum sensitivity is 10mA/div compared with 1mA/div for CPO30A (878-7604 ) and CPO31A (878-7607 ). The maximum conductor size for these four models is 5mm OD. CP150 (801-4855 ) and CP500 (724-0918 ) have minimum sensitivity 100mA/div and maximum conductor size 20mm OD. Teledyne LeCroy current probes have a small form factor which makes probing easier on a crowded compact board.
Features and Benefits
ProBus active probe interface with automatic scaling in A/div
Autozero and degauss capabilities built-into instrument’s user interface
700 Apeak current
30 Arms continuous current
2MHz bandwidth
100mA/div sensitivity
Compatible with the DSC015
Applications
Switching power supplies
Motor drives
Electric vehicles
Uninterruptible power supplies
Certifications
CAT II 600V
CAT III 300V
CAT II
CAT III
Liens connexes
- Teledyne LeCroy CP031 Oscilloscope Probe 100 MHz
- Teledyne LeCroy CP150-6M Oscilloscope Probe 5 MHz
- Teledyne LeCroy CP030-3M Oscilloscope Probe 10 MHz, ProBus Connector
- Teledyne LeCroy CP Series CP150B Oscilloscope Probe 10 MHz, ProBus Connector
- Teledyne LeCroy CP Series CP030B Oscilloscope Probe 50 MHz, ProBus Connector
- Teledyne LeCroy Current Probe 100 MHz
- Teledyne LeCroy CP Series CP150 Oscilloscope Probe 100 MHz, Probus Active Probe Interface Connector
- Teledyne LeCroy T3CP Series T3CP500-5 Oscilloscope Probe 5 MHz, BNC Connector