Keysight Technologies N2870A Series N2871A Oscilloscope Probe, Voltage Type, 200 MHz, 1:10, BNC Connector

Visuel non contractuel

Voir la catégorie

Sous-total (1 unité)*

424,00 €

(TVA exclue)

513,04 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 5 unité(s) prête(s) à être expédiée(s)
  • Plus 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +424,00 €

*Prix donné à titre indicatif

N° de stock RS:
702-3899
Numéro d'article Distrelec:
301-50-481
Référence fabricant:
N2871A
Fabricant:
Keysight Technologies
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Keysight Technologies

Probe Type

Voltage

Product Type

Oscilloscope Probe

Attenuation

1:10

Bandwidth

200MHz

Maximum Common Mode Input Voltage

400V

Connector Type

BNC

Model Number

N2871A

Number of Probes

4

Safety Category Level

CAT II

Safety Category Voltage

400V

Series

N2870A

Standards/Approvals

No

Pays d'origine :
DE

Keysight N2870A Series Passive Probes and Accessories


Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip is also spring loaded, keeping it from slipping off the device being probed. To minimize the inductive effects that cause ringing of high speed signals, the innovative ground blade or spring ground connection can be used. Adhesive copper pads provided with the probe can be attached on top of an IC and connected to its ground pins to create a convenient ground plane for the probe to connect to. When used with the ground blade this method provides an ideal ground connection for probing signals with high frequency contents. The IC cap fits over the probe tip, providing a convenient self-aligning connection to fine-pitch IC pins.

Weight (probe only) 48g

Cable length 1.3m

Operating temperature 0 °C to +50°C

Non-operating temperature -40 °C to +70°C

Operating altitude 2000 m (6,561ft)

Non-operating altitude 15,000m (49,212 ft)

Operating humidity 80% room humidity for temperatures up to 31 °C, decreasing linearly to 40% at 50°C

Pollution degree 2

Passive Oscilloscope Probes


Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Supplied with

1 spring-loaded probe tip, 4 spare probe tips (2 spring-loaded and 2 rigid) and 5 different IC caps for IC lead pitches from 0.5mm to 1.27mm

Liens connexes