Vega VEGAWAVE 61 Series Tuning Fork Level Switch, Relay Output, Horizontal, Aluminium/PBT Body

Voir l’ensemble des Level Sensors

Sous-total (1 unité)*

439,05 €

(TVA exclue)

531,25 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 15 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 2 unité(s) expédiée(s) à partir du 05 février 2026
  • Plus 3 unité(s) expédiée(s) à partir du 12 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +439,05 €

*Prix donné à titre indicatif

N° de stock RS:
386-957
Référence fabricant:
WAVES61.EXX2RA
Fabricant:
Vega
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Vega

Device Type

Tuning Fork

Mounting Type

Horizontal

Switch Output

Relay

Body Material

Aluminium/PBT

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

+80°C

Maximum Current

1 A dc, 3 A ac

Maximum Pressure

25bar

Series

VEGAWAVE 61

Statut RoHS : Exempté

Pays d'origine :
DE

Vega Vibrating Level Switch


The Vega vibrating level switch has a relay (DPDT) output. This level switch detects the minimum or maximum level reliably. The tuning fork is ideal for use in adhesive and abrasive products as well as in bulk solids with low density. It detects light bulk solids, even those down to 8g/L. The robust construction also makes it possible to use it in very heavy media. Vibrating Liquid/Solid Level Probes – Squings.

All of these probes are maintenance-free and have an external LED switch status indication.

Features and Benefits


The supply voltage ranging from 20VAC to 253VAC and 20VDC to 72VDC

Process fitting material is thread from G 1½ A or 1½ NPT

Easy setup without adjustment

Product-independent switching point

Rugged sensor construction

Insensitive to build-up and statically charged products

maintenance-free and does not wear

External LED switch

Housing material PBT (plastic)

Housing protection

Switching current is 400mA (maximum)

Blocking current is greater than 100μA

Switching delay ON: approx. 0.5 seconds/OFF: approx. 1 second

Probe length is 220mm (8.7in)

Applications


Ideal level switch for almost all bulk solids applications

Used for overfill and low-level detection in media like grain, fine aggregates, sand and heavier powders such as cement and metal oxides

Applications in heavy, fine to coarse bulk solids

Certifications


IP66 rated

IP67 rated

ATEX II 1/3 D IP66 T

Liens connexes