RS PRO Self-Regulating Trace Heating System Trace Heating Termination Kit x 50 mm, 200 °C, -60 °C
- N° de stock RS:
- 256-109
- Numéro d'article Distrelec:
- 303-91-578
- Fabricant:
- RS PRO
Sous-total (1 kit)*
34,21 €
(TVA exclue)
41,39 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 28 unité(s) prête(s) à être expédiée(s)
- Plus 79 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Kit(s) | le kit |
|---|---|
| 1 + | 34,21 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 256-109
- Numéro d'article Distrelec:
- 303-91-578
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Trace Heating Termination Kit | |
| Sub Type | Self-Regulating Trace Heating System | |
| Width | 50 mm | |
| Minimum Operating Temperature | -60°C | |
| Material | Mineral, Silicone, Fibreglass Insulation, Aluminium Foil (Recommended For Covering Tape) | |
| Maximum Operating Temperature | 200°C | |
| Standards/Approvals | No | |
| Hazardous Area Certification | Non-Hazardous Area | |
| Contents | 3 End Seal Moulds, 1 Tube of Silicon Adhesive, 3 Warning Labels, 3 Small Silicone Tubes | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Trace Heating Termination Kit | ||
Sub Type Self-Regulating Trace Heating System | ||
Width 50 mm | ||
Minimum Operating Temperature -60°C | ||
Material Mineral, Silicone, Fibreglass Insulation, Aluminium Foil (Recommended For Covering Tape) | ||
Maximum Operating Temperature 200°C | ||
Standards/Approvals No | ||
Hazardous Area Certification Non-Hazardous Area | ||
Contents 3 End Seal Moulds, 1 Tube of Silicon Adhesive, 3 Warning Labels, 3 Small Silicone Tubes | ||
- Pays d'origine :
- GB
RS PRO Trace Heating Termination Kit (256-109)
When used with heat cable (RS stock no. 256-244, 665-7419 and 665-7413) this kit will be sufficient for three sets of terminations. The kit consists of the following:
3 end seal moulds
3 small silicone tubes
1 tube of silicon adhesive
3 Warning labels
3 O Ring Crimp
RS PRO Silicone Insulated Parallel Circuit Heating Tape
RS PRO range of parallel circuit heating tape, with a constant wattage output for process temperature maintenance applications. This tape is flexible enough to allow it to be spiralled around a suitable pipe or vessel. The heating tape consists of several short heating zones each connected across a pair of continuous bus-wire conductors.
The main role of heat trace cables is stopping pipework from freezing. When water pipes freeze and burst, this can cause a great deal of damage and expense to homeowners and businesses. Heating cables provide controllable heat which helps pipes from freezing and keep liquids moving.
RS PRO have a great range of trace heating products which can help protect pipes from freezing, by maintaining the right temperature inside the pipe.
Heat tapes are a flexible solution that can be used to heat any surface or body requiring fast and efficient direct-contact heating.
Trace heating options include:
703-3108 - 15W/m, 110 V, 20m cable
703-3101 - 15W/m,110 V, 50m cable
703-3105 - 15W/m, 110 V, 100m cable
256-244 - 15W/m, 240 V, 20m cable
665-7419 - 15W/m, 240 V, 50m cable
665-7413 - 15W/m, 240 V, 100m cable
256-109 - Trace Heating Termination Kit
Features and Benefits:
Constant wattage per meter, parallel circuit heating tape
Cut to length
Flexible - can be wrapped around pipes
Various lengths available - 20m, 50m or 100m
Voltage ratings either 110 V or 240 V
Typical Applications:
Trace heating cables are electric heating elements designed to provide focused and controllable heat used to prevent pipes, outdoor taps and gutters from freezing, or to maintain a desired temperature on pipes to keep liquids moving.
· For use for internal or external temperature maintenance applications
· Frost protection
· Water, oil and chemical lines
· Sprinkler system mains
· Supply piping
· Not for use in hazardous areas
FAQs
When is trace heating required?
Trace heating cable systems are ideal for protecting pipes from freezing, maintaining the temperature of a hot water system and maintaining process temperatures for smooth and efficient running of process plant equipment.
Why RS PRO?
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Liens connexes
- RS PRO Trace Heating Termination Kit
- RS PRO Trace Heating Cable -60 → +200 °C, 120m
- RS PRO Trace Heating Termination Kit, Maximum of +65 °C
- RS PRO Constant Wattage 40W/m -60 → +200 °C, 20m
- RS PRO Constant Wattage 40W/m -60 → +200 °C, 20m
- RS PRO Constant Wattage 40W/m -60 → +200 °C, 50m
- RS PRO Constant Wattage 40W/m -60 → +200 °C, 50m
- RS PRO Constant Wattage 20W/m -60 → +200 °C, 20m
