Teledyne LeCroy T3CP100-2 Oscilloscope Probe, Current Type, 2 MHz, 100 dB, BNC Connector
- N° de stock RS:
- 240-6603
- Numéro d'article Distrelec:
- 302-64-116
- Référence fabricant:
- T3CP100-2
- Fabricant:
- Teledyne LeCroy
Sous-total (1 unité)*
1 322,86 €
(TVA exclue)
1 600,66 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 5 unité(s) prête(s) à être expédiée(s)
- Plus 3 unité(s) expédiée(s) à partir du 19 juin 2026
- Plus 2 unité(s) expédiée(s) à partir du 31 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1 322,86 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 240-6603
- Numéro d'article Distrelec:
- 302-64-116
- Référence fabricant:
- T3CP100-2
- Fabricant:
- Teledyne LeCroy
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Teledyne LeCroy | |
| Product Type | Oscilloscope Probe | |
| Probe Type | Current | |
| Attenuation | 100 dB | |
| Bandwidth | 2MHz | |
| Maximum Common Mode Input Voltage | 600V | |
| Connector Type | BNC | |
| Model Number | T3CP100-2 | |
| Safety Category Level | CAT II, CAT I, CAT III | |
| Safety Category Voltage | 600V | |
| Standards/Approvals | No | |
| Rise Time | 175ns | |
| Sélectionner tout | ||
|---|---|---|
Marque Teledyne LeCroy | ||
Product Type Oscilloscope Probe | ||
Probe Type Current | ||
Attenuation 100 dB | ||
Bandwidth 2MHz | ||
Maximum Common Mode Input Voltage 600V | ||
Connector Type BNC | ||
Model Number T3CP100-2 | ||
Safety Category Level CAT II, CAT I, CAT III | ||
Safety Category Voltage 600V | ||
Standards/Approvals No | ||
Rise Time 175ns | ||
- Pays d'origine :
- CN
The Teledyne Test Tools new current probe is a DC to 2 MHz bandwidth active AC/DC coupled probe, featuring 2 ranges of 100 A Peak, 70 A rms / 10 A Peak, 7 A rms, fast and accurate waveform capture, rise time of ≤ 175 ns and low test circuit loading. This probe can be used with any oscilloscope having a 1 MΩ BNC input.
Bandwidth of 2 MHz
12 mm probe jaw size
Simultaneous DC and AC measurement coverage
Connects to any oscilloscope with a 1 MOhm input impedance and BNC connector
Over-current protection with audio indicator
Built-in degaussing and zero setting
Applications
Power design and power component measurements
Consumer electronics and household appliances
Domestic and industrial photo-voltaic (PV) system design and maintenance
Automotive and vehicle electronics
Industrial and military electronics
Service technicians
Research and development
Universities, general electronics and education
Liens connexes
- Teledyne LeCroy T3HVD7000-100 Oscilloscope Probe 100 MHz BNC Connector
- Teledyne LeCroy PPE6KV-A Oscilloscope Probe 500 MHz BNC Connector
- Teledyne LeCroy T3HVD1500-70 Oscilloscope Probe 70 MHz BNC Connector
- Teledyne LeCroy T3HVD1500-200 Oscilloscope Probe 200 MHz BNC Connector
- Teledyne LeCroy HVP Series HVP120 Oscilloscope Probe 400 MHz BNC Connector
- Teledyne LeCroy T3LVD20-200 Oscilloscope Probe Differential Type 10 dB, BNC Connector
- Teledyne LeCroy T3RC Series T3RC0120-UM Oscilloscope Probe 30 MHz BNC Connector
- Teledyne LeCroy T3RC Series T3RC0060-LF Oscilloscope Probe 5 MHz BNC Connector
