Eaton Switch Disconnector Auxiliary Switch, P1E Series for Use with P1.../EA Series, P1.../EZ Series, P1.../E Series

Voir la catégorie
Offre groupée disponible

Sous-total (1 unité)*

12,07 €

(TVA exclue)

14,60 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 8 unité(s) prête(s) à être expédiée(s)
  • Plus 69 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 20 unité(s) expédiée(s) à partir du 02 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité
Prix par unité
1 - 412,07 €
5 - 1111,70 €
12 +11,31 €

*Prix donné à titre indicatif

N° de stock RS:
219-1445
Numéro d'article Distrelec:
135-11-897
Référence fabricant:
000651 N-P1E
Fabricant:
Eaton
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Eaton

Product Type

Switch Disconnector Auxiliary Switch

Series

P1E

For Use With

P1.../EA Series, P1.../EZ Series, P1.../E Series

Accessory Type

Switched Neutral

Depth

11.5mm

Eaton Panel Mount Isolator Switch


Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring, manually disconnecting the power supply to isolated parts of the circuit. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits


• The perfect solution for installing as a safety measure

• Used as an emergency switching off/emergency stop device

• The basic functions are when used as a main switch, maintenance switch or manual override switch

• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions

• Rated uninterrupted current of up to 32 A

• Lockable in the 0/OFF position, with up to three padlocks

• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

• Common accessories: 262-3784, 219-1445, 219-1439

What is the difference between a fused switch disconnector and a non-fused switch disconnector?


Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller

Liens connexes