Honeywell Technologies ABPMRRV060MGAA5 Pressure SensorBoard 6 SMT

N° de stock RS:: 214-1426
Référence fabricant:: ABPMRRV060MGAA5
Fabricant:: Honeywell

Honeywell Technologies ABPMRRV060MGAA5 Pressure SensorBoard 6 SMT

Sous-total (1 boîte de 50 unités)*

1 552,15 €

(TVA exclue)

1 878,10 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

50 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
50 +	31,043 €	1 552,15 €

*Prix donné à titre indicatif

N° de stock RS:: 214-1426
Référence fabricant:: ABPMRRV060MGAA5
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Sensor Type	Piezoresistive Pressure Sensor
	Maximum Overload Pressure	2000mbar
	Product Type	Pressure Sensor
	Mount Type	Board
	Package Type	SMT
	Pin Count	6
	Minimum Supply Voltage	-0.3V
	Maximum Operating Pressure	60 mbar
	Accuracy	±0.25 %
	Port Type	Dual Radial Barbed
	Maximum Supply Voltage	5V
	Maximum Operating Temperature	+85°C
	Standards/Approvals	BPA Free, LFGB, NSF-169
	Width	6.3mm
	Length	7.3mm
	Height	10.63mm
	Series	ABP
	Minimum Operating Pressure	0mbar
	Minimum Operating Temperature	-40°C
	Automotive Standard	ISO 9001

	Sélectionner tout
	Marque Honeywell
	Sensor Type Piezoresistive Pressure Sensor
	Maximum Overload Pressure 2000mbar
	Product Type Pressure Sensor
	Mount Type Board
	Package Type SMT
	Pin Count 6
	Minimum Supply Voltage -0.3V
	Maximum Operating Pressure 60 mbar
	Accuracy ±0.25 %
	Port Type Dual Radial Barbed
	Maximum Supply Voltage 5V
	Maximum Operating Temperature +85°C
	Standards/Approvals BPA Free, LFGB, NSF-169
	Width 6.3mm
	Length 7.3mm
	Height 10.63mm
	Series ABP
	Minimum Operating Pressure 0mbar
	Minimum Operating Temperature -40°C
	Automotive Standard ISO 9001

Datasheet-ABPMRRV060MGAA5

Honeywell ABP Series Gauge Pressure Sensor, 60 mbar Maximum Operating Pressure, ±0.25% Accuracy - ABPMRRV060MGAA5

This gauge pressure sensor measures pressure relative to ambient and provides a ratiometric analogue or digital output for board-mounted systems. Calibrated and temperature-compensated via an on-board ASIC, it is suitable for reading low-range pressures with Rapid update rates and can be configured for dry gases or liquid media operation depending on port protection.

Features and Benefits:

• ±0.25%FSS accuracy improves measurement fidelity
• Total Error Band ±1.5%FSS over compensated range
• Operating temperature -40°C to 85°C for harsh conditions
• 2kHz digital and 1kHz analogue output update rates
• Single-supply operation at 3.3V or 5.0V for flexible designs
• Sleep mode reduces power consumption to μA levels

Applications

• Used for ventilator and patient monitoring pressure feedback
• Suitable for HVAC differential and flow monitoring systems
• Ideal for pneumatic control and valve position sensing
• Can be used for commercial appliance pressure measurement
• Used with wet-wet differential sensing when gel protected

What media can be applied to the input ports when using the liquid option?

The liquid option includes a silicone-based gel over the electronics under Port 1 enabling use with non-corrosive liquids such as water and saline and permitting condensation exposure.

How does the device handle overpressure and burst conditions?

Overpressure and burst limits depend on range, for a ±60 mbar differential gauge the overload protection is 2000 mbar and specified burst pressures are listed per port in the range tables.

What digital interfaces and resolutions are available?

Digital outputs support I2C or SPI with 12-bit resolution and typical digital counts aligned to defined output percentages over the transfer function.

Which materials contact the measured media in the dry gases option?

Wetted materials include high-temperature polyamide for ports, alumina ceramic substrate, silicon, gold and glass for internal components compatible with non-corrosive gases.

What reliability and lifecycle expectations exist for cyclical use?

The sensor life is specified as a minimum of 1 million pressure cycles, with vibration and shock ratings of 15 g and 100 g respectively.