Infineon BTS428L2ATMA1 High Side 1, High Side Power Switch Power Switch IC 5-Pin, TO-252

N° de stock RS:: 753-2876
Référence fabricant:: BTS428L2ATMA1
Fabricant:: Infineon

Infineon BTS428L2ATMA1 High Side 1, High Side Power Switch Power Switch IC 5-Pin, TO-252

Sous-total (1 unité)*

1,78 €

(TVA exclue)

2,15 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 9 136 unité(s) expédiée(s) à partir du 09 septembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	1,78 €

*Prix donné à titre indicatif

N° de stock RS:: 753-2876
Référence fabricant:: BTS428L2ATMA1
Fabricant:: Infineon

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Infineon
	Product Type	Power Switch IC
	Power Switch Type	High Side Power Switch
	Power Switch Topology	High Side
	Switch On Resistance RdsOn	120mΩ
	Number of Outputs	5
	Number of Inputs	1
	Power Rating	75W
	Mount Type	Surface
	Package Type	TO-252
	Minimum Supply Voltage	4.75V
	Maximum Supply Voltage	41V
	Pin Count	5
	Operating Current	5.8A
	Maximum Operating Temperature	150°C
	Minimum Operating Temperature	-40°C
	Width	6.22mm
	Height	2.3mm
	Standards/Approvals	No
	Length	6.5mm
	Series	BTS428L2
	Automotive Standard	AEC

	Sélectionner tout
	Marque Infineon
	Product Type Power Switch IC
	Power Switch Type High Side Power Switch
	Power Switch Topology High Side
	Switch On Resistance RdsOn 120mΩ
	Number of Outputs 5
	Number of Inputs 1
	Power Rating 75W
	Mount Type Surface
	Package Type TO-252
	Minimum Supply Voltage 4.75V
	Maximum Supply Voltage 41V
	Pin Count 5
	Operating Current 5.8A
	Maximum Operating Temperature 150°C
	Minimum Operating Temperature -40°C
	Width 6.22mm
	Height 2.3mm
	Standards/Approvals No
	Length 6.5mm
	Series BTS428L2
	Automotive Standard AEC

Infineon BTS428L2 Series Power Switch IC, 75W Power Rating, 5.8A Operating Current - BTS428L2ATMA1

This power switch IC is a high‑side semiconductor device designed for automotive electrical systems, providing controlled switching of multiple loads from a single input. It is intended for surface‑mounted use in applications requiring coordinated on/off control and protection features within vehicle environments.

Features and Benefits:

• Five outputs for multiplexed load control and simplified wiring
• Supports a maximum supply voltage of 41V enabling robust transient tolerance
• Operates from 4.75V supply for compatibility with typical vehicle rails
• Rds(on) of 120 mΩ to reduce conduction losses and heat generation
• 5.8A operating current to drive moderate automotive loads reliably
• Power rating of 75W to handle aggregated channel dissipation

Applications

• Suitable for centralised body control module implementations
• Ideal for switching lighting and auxiliary systems in vehicles
• Used with electronic control units requiring multiple outputs
• Can be used for fan and pump actuation in automotive systems
• Suited to compact surface‑mount assemblies on vehicle PCBs

What thermal range can be expected during vehicle operation?

The device is specified to function between -40 °C and 150 °C ambient, allowing use across cold starts and high‑temperature engine‑bay conditions.

How many control inputs are required to operate the outputs?

A single input controls the device, providing coordinated drive across its five outputs for simplified command interfaces.

What package and mounting style does this component use?

It is supplied in a TO‑252 package designed for surface‑mount installation to save board area.

How does the device topology affect system design?

As a high‑side switch, it connects loads to the positive supply, simplifying ground‑referenced sensors and load wiring and easing integration with typical automotive supply architectures.