Texas Instruments TPS22913BYZVT High Side, Load Switch Power Switch IC 4-Pin, DSBGA
- N° de stock RS:
- 268-3647
- Référence fabricant:
- TPS22913BYZVT
- Fabricant:
- Texas Instruments
Offre groupée disponible
Sous-total (1 paquet de 10 unités)*
7,99 €
(TVA exclue)
9,67 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 260 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 - 40 | 0,799 € | 7,99 € |
| 50 - 90 | 0,784 € | 7,84 € |
| 100 - 140 | 0,629 € | 6,29 € |
| 150 + | 0,613 € | 6,13 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 268-3647
- Référence fabricant:
- TPS22913BYZVT
- Fabricant:
- Texas Instruments
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Texas Instruments | |
| Power Switch Topology | High Side | |
| Product Type | Power Switch IC | |
| Power Switch Type | Load Switch | |
| Switch On Resistance RdsOn | 0.06Ω | |
| Package Type | DSBGA | |
| Maximum Supply Voltage | 5V | |
| Pin Count | 4 | |
| Operating Current | 2A | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Texas Instruments | ||
Power Switch Topology High Side | ||
Product Type Power Switch IC | ||
Power Switch Type Load Switch | ||
Switch On Resistance RdsOn 0.06Ω | ||
Package Type DSBGA | ||
Maximum Supply Voltage 5V | ||
Pin Count 4 | ||
Operating Current 2A | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
The Texas Instruments Power switch IC are small and low RON load switches with controlled turn on. The device contains a P channel MOSFET that can operate over an input voltage range of 1.4 V to 5.5 V. The switch is controlled by an on or off input which is capable of interfacing directly with low voltage GPIO control signals.
Integrated single load switch
2 A maximum continuous switch current
Low threshold control input
Controlled slew rate
Under voltage lock out
Full time reverse current protection
Quick output discharge transistor
Liens connexes
- Texas Instruments High Side DSBGA
- Texas Instruments Low Side/High Side DSBGA
- Texas Instruments Low Side/High Side DSBGA
- Texas Instruments TPS22971YZPT Low Side/High Side DSBGA
- Texas Instruments TPS22925CYPHR Low Side/High Side DSBGA
- Texas Instruments Low Side/High Side DSBGA
- Texas Instruments Low Side/High Side DSBGA
- Texas Instruments TPS22925BNYPHR Low Side/High Side DSBGA
